Asus X670E Gene EFI -- Adaptable to Other X670, X670E, B650 and B650E Boards

[jubarim]

Sure, I will stick with the EFI from post #50

 

[Lorys89]

Sure, I will stick with the EFI from post #50

try this @jubarim

 

[CaseySJ]

Check the ACPI tables in your setup, as there are a number of errors shown at the top of the screen image you posted above.

View attachment 10101

These are due to the experimental patch.

 

[CaseySJ]

I need to verify the rename you posted, I copied it without even verifyingI need to verify the rename you posted, I copied it without even verifying

What happens if we leave TableSignature empty? Does this mean the patch was not applied?

 

[Lorys89]

What happens if we leave TableSignature empty? Does this mean the patch was not applied?
View attachment 10103

Probably yes, we'll see when last efi test

 

[CaseySJ]

Probably yes, we'll see when last efi test

In your previous EFI, TableSignature is correct:

But it is empty in this EFI:

Asus X670E Gene EFI -- Adaptable to Other X670, X670E, B650 and B650E Boards

The odd thing is that Lorys EFI in message #50 works to install , but as soon as the installer boots for the first time and I chose the option to continue the install, but it reboots immediately. I am not even able to see anything on the screen. This has happened before when I was trying...

forum.amd-osx.com

 

[jubarim]

try this @jubarim

Not working as Casey suspected. Odd thing is that I opened the confi.plist the Table Signature is already there (as DSDT), not empty ( #82 EFI).

By the way, when I open the config.plist there is a warning (but it's present in the working EFI #50 as well):

OCS: No schema for ResizeUsePciRbIo at 12 index, context <Quirks>!
Serialisation returns 1 error!

 

[Lorys89]

As main efi it uses #50, but it's strange it doesn't start the efi with the rename of the name prw to xprw
In the next few hours I will check better

 

[CaseySJ]

Not working as Casey suspected. Odd thing is that I opened the confi.plist the Table Signature is already there (as DSDT), not empty ( #82 EFI).

So perhaps it is necessary to rename Method _PRW instead of Name _PRW. Hopefully another Gigabyte AM5 user can double-confirm.

By the way, when I open the config.plist there is a warning (but it's present in the working EFI #50 as well):

We can ignore this warning for now. When OpenCore Configurator is updated for OC 0.9.0 this will disappear.

 

[Lorys89]

@CaseySJ new bios for x670e gene https://rog.asus.com/motherboards/rog-crosshair/rog-crosshair-x670e-gene-model/helpdesk_bios/

 

[CaseySJ]

@CaseySJ new bios for x670e gene https://rog.asus.com/motherboards/rog-crosshair/rog-crosshair-x670e-gene-model/helpdesk_bios/

Will try it tomorrow. I have a feeling that ACPI changes have been made that will need some config.plist tweaking…

 

[Lorys89]

Will try it tomorrow. I have a feeling that ACPI changes have been made that will need some config.plist tweaking…

In the hero nothing has changed and always starts macos, they solved something about ram stability

 

[CaseySJ]

In the hero nothing has changed and always starts macos, they solved something about ram stability

I am flashing the latest BIOS now. Using EZ Flash causes code 11 on POST code LED and system freezes. This is due to:

• BIOS -> Advanced -> AMD CBS -> UMC Common Options -> DDR Options -> DDR Memory Features -> Memory Context Restore -> Enabled

After selecting "Load Optimized Defaults", saving the settings, rebooting, and re-entering BIOS Setup, I am able to flash the new BIOS.

I will re-enable that setting shortly.

Update: BIOS 0925 is working well so far. No issues with EFI configuration.

 

[jubarim]

So wrapping up my Gigabyte Aorus Pro AX EFI, do you think it's successful enough to create a post in "Success Stories"?

I can post the current EFI with the credits of everyone that helped me here.

 

[jubarim]

By the way, I will have to pause hacking until a buy a new VGA.

I was also gaming using my RX 6800 XT, bought used:

• Red Dead Redemption 2 quitting out of nowhere after a few minutes.
• I could not finish the 3dMark Time Spy once (tried multiple times) - in this case the computer reboots and there is a long and 3 short beeps --> "1 long beep accompanied by 3 short beeps means an AGP error"

So I"m returning it tomorrow, it was probably using in mining...

 

[CaseySJ]

So wrapping up my Gigabyte Aorus Pro AX EFI, do you think it's successful enough to create a post in "Success Stories"?

I can post the current EFI with the credits of everyone that helped me here.

Please do.

 

[jubarim]

Please do.

I'll do that later today.

By the way, after I removed the 6800XT, I tried to boot using the integrated graphics of Ryzen 7900X: macos booted fine (of course with no video acceleration).

 

[Lorys89]

I'll do that later today.

By the way, after I removed the 6800XT, I tried to boot using the integrated graphics of Ryzen 7900X: macos booted fine (of course with no video acceleration).

@jubarim please try form this efi

 

[Lorys89]

@CaseySJ


I used the gigabyte patched dsdt sent by you, where the _prw method is already renamed to xprw and so it just finds the name _prw and renames it to zprw
do you think it can work?

 

[CaseySJ]

@CaseySJ
View attachment 10112

I used the gigabyte patched dsdt sent by you, where the _prw method is already renamed to xprw and so it just finds the name _prw and renames it to zprw
do you think it can work?

Are you trying to rename both method and name? The DSDT opens in MaciASL if either one of those is renamed.