Search results

If you need any more help it would be best if you posted (zipped and attached) a copy of your EFI folder, as the config.plist doesn't always tell us the whole story. I have a couple of B550/B550M Hacks so providing details of the components (make & model) in your system would also be helpful...

I wouldn't recommend any AMD laptop for running macOS. No matter which IGPU or dGPU it contained. For the sake of clarity the AMD IGPU's compatible with NootedRed.kext are these, as stated on the NootedRed site. The entire Vega Raven ASIC family (Ryzen 1xxx (Athlon Silver/Gold) to 5xxx, and...

Points for you to look into. You have some unnecessary and duplicate SSDT’s in your /EFI/OC/ACPI folder and config.plist. You don’t need SSDT-USBW.aml with your B550 system. I would remove this ACPI table. SSDT-XOSI.aml won’t work if the accompanying ACPI Patch isn’t available in your...

When attaching a file or folder to this or most other Hackintosh forums it is necessary to zip the file or folder that you want to post. PDF's and PNG/JPEG image files are the exception to this rule, they can usually be attached as they come. There 3 x kexts appear to be loaded/injected in...

Yes, the VRAM being limited to 512mb could be the reason NootedRed.kext doesn't work. The Brightness keys not working is a little confusing, do you mean the screen brightness level function keys (F5 & F6)? Fan running at full blast could be caused by a number of devices, and its not clear from...

How did using OpCore-Simplify fix your SATA issue? Which patch, kext, SSDT or DeviceProperties were added to your OC setup to enable the AMD SATA controller?

All I can think to suggest is trying a number of different versions of NootedRed.kext, as not all versions work the same. The version attached below is from October 2023. See if this older version works with your laptop's IGPU. It worked with the AMD IGPU on a HP 705 G5 system that runs...

Your shutdown troubleshooting doc is a fascinating read, so thanks for that. Not sure why you expect anyone else to offer anything more with regards your testing and ruling out specific issues seen in the various logs. I for one don’t go that deep into troubleshooting issues, not when there is...

Tried to get RP-CORE running on the Asus B550M system again, with all the settings and checks in place as used on my Dell Intel system. Failed again. System refuses to boot in to Tahoe with the new/edited Snapshot, so all I could do was boot in to Recovery and reinstall Tahoe to get it back up...

Installed RP-CORE on one of my Comet Lake Dell OptiPlex micro systems, which contains a Broadcom WiFi/BT card that works with OCLP in Sequoia. As expected the RP-CORE script worked on this Intel system, probably due to Intel VT-d being present and enabled in the Bios. So I successfully enabled...

The error message you are seeing occurs right after macOS loads the kernel, usually signaling a failure in initializing graphics, PCI devices, or an error in your ACPI tables. So assuming that NootedRed is the only possible cause may not be wise. No, the system wouldn’t need NootedRed for it...

I have used the ACPI tables you provided in the post above in the 'AMFI.zip' and Corpnewt's SSDTTime script to generate a number of custom SSDT's and ACPI patches for your laptop. The screenshot above is a view of Corpnewt's SSDTTime window with ACPIT tables used from your zipped folder. I...

No, I haven't seen any device property or patches for an AMD 5700U/G CPU with this type of fast reboot issue. You may need to try booting the system while NootedRed.kext is disabled in the config.plist. As it is a known trait that the system can kernel panic when NootedRed is enabled and you...

Had a play with RP-CORE on my Asus B550M system (bottom system in my signature), where I have OCLP Modern Wireless working in Sequoia. Tried getting the same in Tahoe, failed miserably. Ran through all the steps in the RP-CORE GitHub page, made all the config changes, set DisableIOMapper to...

That Log file is an interesting and long read. I got the following from reading it. Your SSDT-PLUG-ALT.aml table is not configured for your AMD CPU. It appears to be aimed at an Intel CPU rather than an AMD CPU. It is likely that the other SSDT's are also incorrect for your system, but it...

Try this revised EFI, see if this helps.

Can you post a zipped copy of your whole EFI folder, so I can see exactly what you are using with your HP laptop. Sometimes a simple duplication or incorrect file can be found and changed/edited to solve an issue. Without this I am pretty much flying in the dark.

Use the Release version, see if that makes any difference. When you boot the laptop with NootedRed disabled, i.e. with the white screen, can you enter the OS and set options in System Settings? If yes, set the laptop to allow screen sharing. Then try booting the HP with the kext enabled and...

That is another app I don’t use (OCAT). Simply never seen the need to dumb down the EFI creation and editing, which can be done with the OC Release folder and ProperTree. GL was I believe banned from Tonymacx86’s site due to some suspect money spinning links and non-vanilla recommendations. I...

You need to disable USBToolBox.kext and UTBDefault.kext if your USBMap.kext is correct. The first two kexts will do nothing positive for your system. Remove the NRedDebug boot argument. the amfi=0x80 should be replaced with -amfipassbeta boot argument. Remove the incorrect revpatch=sbvm boot...