Need help with Ryzen 7700X & Gigabyte X670E

[ManuelB]

which settings were made in Opencore ?

 

[CaseySJ]

@CaseySJ & @ExtremeXT I hope all correct

Unfortunately the problems with DSDT and table EXTGPP00 are still present. So Gigabyte has not fixed this part of the BIOS.

 

[ManuelB]

@ExtremeXT & @CaseySJ starke Arbeit mit dem Audio opencore 0.8.7 gerade neue EFI getestet !!!

 

[CaseySJ]

@ManuelB,

Please try the attached EFI folder.

 

[ManuelB]

@CaseySJ I can only test it right away the mainboard is bitchy again I'm make a bios update again sorry ..I'm almost thinking about sending it back and complaining, although I haven't liked the quality and the price-performance ratio for the last few years. But I will look to buy another onealthough with the EFI the made do the syteme seems to be faster

 

[ManuelB]

@CaseySJ the Efi doesn't work

 

[CaseySJ]

@CaseySJ the Efi doesn't work

Probably good to switch to Asus motherboard.

Do you still have the right to return the Gigabyte board?

 

[ManuelB]

@CaseySJ unfortunately no .... which one should I take ... I will test the efi again soon ... but now try to get a clean install on an external one with my new one without any problems ..

 

[ManuelB]

@CaseySJ what did you change? at EFI

 

[CaseySJ]

@CaseySJ what did you change? at EFI

I made a mistake -- I thought you had Ryzen 9 7950X.

Please try attached config.plist in which I use 8 cores (Ryzen 7 7700X).

 

[ManuelB]

@CaseySJ this efi crashes my system

 

[ManuelB]

@CaseySJ welche BIOS-Einstellungen haben Sie verwendet?

 

[ManuelB]

y@CaseySJ. Das ist die EFI von dir Ich bin zurück zur vorherigen Bios-Version gewechselt und habe weniger Probleme

 

[CaseySJ]

y@CaseySJ. Das ist die EFI von dir Ich bin zurück zur vorherigen Bios-Version gewechselt und habe weniger Probleme

Try a full power down:

• Shutdown the computer
• Flip power switch on PSU to OFF for 10 seconds
• Switch computer back on

If the problem is still there, then try resetting NVRAM:

• OpenCore boot menu --> press <space bar>
• On the right side you will see Reset NVRAM

 

[ManuelB]

@CaseySJ this have i make

 

[ManuelB]

@CaseySJ I tested it, it then boots Windows, so I don't think the PCI assignment is correct

 

[CaseySJ]

@CaseySJ I tested it, it then boots Windows, so I don't think the PCI assignment is correct

I've made a number of changes and tested this EFI on my own system.

Please give it a try without making any changes.

If system fails to boot, then try disabling both USBToolBox.kext and UTBMap.kext and try again.

The main problem was bad SSDT-EC.

 

[ManuelB]

@CaseySJ it work

 

[ExtremeXT]

I've made a number of changes and tested this EFI on my own system.

Please give it a try without making any changes.

If system fails to boot, then try disabling both USBToolBox.kext and UTBMap.kext and try again.

The main problem was bad SSDT-EC.

Your SSDT-SBUS-MCHC is invalid, their device is D036 instead of D033. To find it on AMD systems look for 0x00140000 in the _ADR variable in the DSDT. Also, there is no EC0 device to disable in their DSDT. Also, you used the old MmioWhitelist with only one entry whitelisted.

@ManuelB Give this one a try.

 

[CaseySJ]

@ManuelB,

I recommend changing the file names of these two SSDTs:

• Change SSDT-EC-USBX.aml to SSDT-EC-USBX-AMD.aml and rename the file in Finder
• Change SSDT-SBUS-MCHC.aml to SSDT-SBUS-MCHC-AMD.aml and rename the file in Finder

This will allow HackinDROM to upgrade OpenCore for you in the future. If you need help with HackinDROM, just ask.

 

[ExtremeXT]

@ManuelB,

I recommend changing the file names of these two SSDTs:

• Change SSDT-EC-USBX.aml to SSDT-EC-USBX-AMD.aml and rename the file in Finder
• Change SSDT-SBUS-MCHC.aml to SSDT-SBUS-MCHC-AMD.aml and rename the file in Finder

This will allow HackinDROM to upgrade OpenCore for you in the future. If you need help with HackinDROM, just ask.
View attachment 8703View attachment 8704

Does it use that to check if it's an AMD system? Can't that be done with the detection of the kernel patches?