AMD Rayon R7 5800H Install Monterey kernel Panic

[zxc2689963]

Hello everyone, the Monterey kernel panic problem has been solved for AMD R7 5800H notebook installation. It is a great thing that the CPU can now run on 8 cores. Thank you guys very much.Thank them for discovering the problem and providing kernel patches @ExtremeX@Visual

Brand: Lenovo
Model: Legion 5 6th Gen
CPU: AMD Ryzen 7 5800h
GPU: AMD Radeon RX 6600m 8GB ( Separate GPU mode)
HDD: Samsung SSD 970 EVO Plus 1TB (1000 GB, PCI-E 3.0 x4)
WDS500G3X0C-00SJG0 (500 GB, PCI-E 3.0 x4)
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
Intel(R) Wi-Fi 6E AX210 160MHz
Ram: x2 8GB 3200mhz ddr4
Display: 15.6 1080p 165HZ

Updated October 5, 2023
Problems solved:
1. You do not need to disable XHCI
2. The microphone problem is rectified
3. Monitor brightness can be adjusted, only in Ventura

Unresolved issues:
Failure to wake from sleep

 

[zljjjjjj]

Stuck where? I'm unable to help without information.

The login screen freezes and cannot enter the password.

 

[ExtremeXT]

The login screen freezes and cannot enter the password.

Ventura?

 

[zljjjjjj]

Ventura?

yes,Ventura 13.3.1

 

[zljjjjjj]

Ventura?

Can you make a separate EFI for Ventura, thanks?

 

[zljjjjjj]

@ExtremeXT has joined voodooi2b.kext in the latest EFI released by github, and the touchpad has worked successfully. The following Settings need to be modified
View attachment 10526
View attachment 10528
View attachment 10529
View attachment 10530

大佬分享一下你的EFI呗，ExtremeXT大佬的我用不了，谢谢
Brother share your EFI, ExtremeXT big guy I can't use it, thank you

 

[ExtremeXT]

大佬分享一下你的EFI呗，ExtremeXT大佬的我用不了，谢谢
Brother share your EFI, ExtremeXT big guy I can't use it, thank you

Do you have the Intel Wi-Fi + AMD GPU model?

 

[zljjjjjj]

Do you have the Intel Wi-Fi + AMD GPU model?

CPU: AMD Ryzen 7 5800h
GPU: AMD Radeon RX 6600m 8GB ( Separate GPU mode)
HDD: WDSN550(1000 GB, PCI-E 3.0 x4)
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
Intel(R) Wi-Fi 6E AX210 160MHz

 

[ExtremeXT]

CPU: AMD Ryzen 7 5800h
GPU: AMD Radeon RX 6600m 8GB ( Separate GPU mode)
HDD: WDSN550(1000 GB, PCI-E 3.0 x4)
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
Intel(R) Wi-Fi 6E AX210 160MHz

Weird that it's crashing, maybe try disabling AirportItlwm.

 

[zljjjjjj]

Weird that it's crashing, maybe try disabling AirportItlwm.

Okay, let me give it a try. Is it okay for you to use it? Do you need to change the order of kexts

 

[zljjjjjj]

Weird that it's crashing, maybe try disabling AirportItlwm.

After disabling AirportItlwm, boot into the login interface and cannot enter the password, and restart after one minute. Can you come up with a minimized EFI.

 

[zljjjjjj]

Do you have the Intel Wi-Fi + AMD GPU model?

 

[zxc2689963]

This is the EFI I'm using, streamlining some unnecessary Settings and improving stability

• Only Ventura 13.3+ is supported

 

[zljjjjjj]

这是我正在使用的 EFI，简化了一些不必要的设置并提高稳定性

• 仅支持文图拉 13.3+

Thank

 

[kalkmann]

This is the EFI I'm using, streamlining some unnecessary Settings and improving stability

• Only Ventura 13.3+ is supported

I upgraded to 13.3.1 using your EFI and the boot time is super fast. MacBook Pro SMBIOS and HEVC encode/decode working ok and mostly, Trackpad working! Congratulations on new efforts and discoveries!
I have some questions, which still don't work here:

• With SSDT-PNLF-CFL.aml present in your ACPI folder, does the brightness control work natively?
• I saw that you are using a SoftPowerPlay table on the GPU, did this resolve the Sleep on your machine?

Thanks!

 

[ExtremeXT]

I upgraded to 13.3.1 using your EFI and the boot time is super fast. MacBook Pro SMBIOS and HEVC encode/decode working ok and mostly, Trackpad working! Congratulations on new efforts and discoveries!
I have some questions, which still don't work here:

• With SSDT-PNLF-CFL.aml present in your ACPI folder, does the brightness control work natively?
• I saw that you are using a SoftPowerPlay table on the GPU, did this resolve the Sleep on your machine?

Thanks!

HEVC encoding works on MacBookPro SMBIOS? I tried to send you some messages over on Discord too, by the way.

 

[kalkmann]

HEVC encoding works on MacBookPro SMBIOS? I tried to send you some messages over on Discord too, by the way.

Apparently it's working with this EFI (I just did the simple test with videoproc). It's using MacBookPro15,2 and I haven't made any changes to the config.plist other than the serials.

Sorry about the unread messages... My racing season has started and I barely have time to test/read anything else on the hacks, but they are serving me well in the functions. Thanks for your availability and if I discover something new by chance here, I'll post it on the forum.

 

[ExtremeXT]

Apparently it's working with this EFI (I just did the simple test with videoproc). It's using MacBookPro15,2 and I haven't made any changes to the config.plist other than the serials.

Sorry about the unread messages... My racing season has started and I barely have time to test/read anything else on the hacks, but they are serving me well in the functions. Thanks for your availability and if I discover something new by chance here, I'll post it on the forum.

Answer when you're able to.

 

[翻斗花园-胡图图]

This is the EFI I'm using, streamlining some unnecessary Settings and improving stability

• Only Ventura 13.3+ is supported

After seeing that you updated EFI, I also re-installed it, and found that the touchpad could work normally. I also bought a network card "AX210" with the same configuration as yours online after I just arrived today and tried it, and it worked normally. However, I seem to find something wrong with the 3.5mm audio interface, and the sound is not normal. I don't know if it is only my computer that has this situation, here is the feedback. It is very impressive that this notebook has been deciphered to this extent by all of you. Thank you for your efforts here.

 

[翻斗花园-胡图图]

大约一个小时后它就崩溃了

 

[zljjjjjj]

大约一个小时后它就崩溃了

Turn off sleep
把休眠关了