Real Thunderbolt 3 at 40Gb/s Titan Ridge v2

[AMDPUSH]

Hi, i would like to know if somebody reach this speed with his TB3 ?
I succeed the system to recognize the Universal audio sattelite TB3, and behind it plugged an T7 Samsung ssd at 1050.
Reading at the TB system report, there nothing loaded. But if i look at the USB i can see the SSD at 10 GB/s
Perhaps it is an old subject, but let's give me the thread to have 40 Gb/s even if the ssd can not reach that speed.

 

[Arrakis]

Hello,
Here are the speeds of my flashed Titan Ridge Thunderbolt 3 card for Mac.
Ultra Studio 4k Mini is connected in thunderbolt 3 and as you can see the speed is correct.

 

[AMDPUSH]

Ok nice. and is it impossible to have these infos without flashing the card ?

 

[Arrakis]

No, I do not think so. Did you address the path of the device (Titan Ridge) in the "DeviceProperties" of the config.plist file
If so, the information should appear in the thunderbolt information of the system.

 

[AMDPUSH]

Ok nice. and is it impossible to have these infos without flashing the card ?

No, I do not think so. Did you address the path of the device (Titan Ridge) in the "DeviceProperties" of the config.plist file
If so, the information should appear in the thunderbolt information of the system.

Thank you for your answer, and no, i didn't do that
"address the path of the device (Titan Ridge) in the "DeviceProperties" of the config.plist"
How to do that ?!

 

[Arrakis]

you have to use hackintool then in the PCIe section,
you will have the address of the card (picture 1) that must be entered in Deviceproperties of the config.plist file (picture 2).

 

[AMDPUSH]

I think there's something i didn't understand..... lol

 

[Arrakis]

Please indicate in the .config plist file in which slot it is installed. It should also appear in PCI information.

 

[AMDPUSH]

It's ok in PCI but nothing in TB

 

[Arrakis]

Is there the SSDT-TBOLT3-NVM23.aml file in the ACPI folder ?

 

[AMDPUSH]

Is there the SSDT-TBOLT3-NVM23.aml file in the ACPI folder ?

No i haven't it, and i don't want to flash the card for the moment.
I am using windows, as Steinberg products don't work on ryzentosh except a 10 version of cubase elements.
But i would like to try this file if you can post it.
Thanks

 

[Arrakis]

below

 

[AMDPUSH]

Nothing in the thunderbolt panel.
Anyway thank you for all.
Have a bless and nice week.

 

[fariel23]

like @AMDPUSH i have the same problem NO DRIVERS LOADED! i would really like to know the solution to this. i did a pci info to opencore like you suggested but nothing in the panel of thunderbolt

 

[Arrakis]

Did you flash the map for Mac ?

 

[fariel23]

Did you flash the map for Mac ?

what map?

 

[Arrakis]

The titan ridge card if we are talking about the same thing.

 

[fariel23]

The titan ridge card if we are talking about the same thing.

of course but is not map/flash it is just standard no modification

 

[iriefda]

The titan ridge card if we are talking about the same thing.

Does the Gigabyte Titan Ridge card require to be flashed with a different firmware to work in Big Sur?
For me it was working fine in Catalina without flashing, but after upgrading to Big Sur Thunderbolt is not recognised anymore (in System Report it just reads "Driver not loaded").

It's even more strange that I can see it in the PCI tab and it says "Driver Installed" there.

 

[Arrakis]

@iriefda
For my part when I flashed the card, I was under Catalina and in the passage to BigSur I did not have to flash with a new version.
The card is still recognized, I am currently under 11.2.3

Have you checked that you have the SSDT-TBOLT3-NVM23.aml file in the EFI / OC / ACPI folder and properly activated and present in config.plist ACPI ?