Need help installing macOS on AMD Ryzen 7 9800X3D

unclesam

Member
AMD OS X Member
Apr 29, 2025
34
9
8
HongKong
CPU:
Ryzen 9900X
Hello everyone,

I need some help with installing macOS 15.7.1 on my AMD Ryzen 7 9800X3D system.
Here are my basic hardware details:
  • CPU: Ryzen 7 9800X3D
  • Motherboard: ASUS TUF B850M-Plus WiFi7
  • GPU: Radeon RX 6600 XT
  • RAM: 64GB DDR5
  • NVMe SSD: Micron Cruical P510 1TB
Here’s what I’ve tried so far:
  • I used the SysReport tool from OpenCore Debug version on this machine to dump the ACPI tables, including SSDT-EC, SSDT-HPET, SSDT-USBX, and SSDT-PLUG-ALT.
  • Then, I combined them with the EFI that previously worked on my Ryzen 9 9900X + ASUS B850 setup.
  • I double-checked all BIOS settings to make sure nothing was misconfigured (e.g., CSM disabled, Above 4G Decoding enabled, etc.).
However, I ended up with the following boot screen (see attached image).
At this point, I still cannot enter the macOS installer.
截圖 2025-10-17 上午10.38.48.png

I’ve uploaded my config.plist for review — I’d really appreciate it if anyone could help check my config.plist, kernel patches, USBMap, and ACPI setup.
Thanks a lot for your help and guidance! 🙏



 

Attachments

Last edited:
Hello everyone,

I need some help with installing macOS 15.7.1 on my AMD Ryzen 7 9800X3D system.
Here are my basic hardware details:
  • CPU: Ryzen 7 9800X3D
  • Motherboard: ASUS TUF B850M-Plus WiFi7
  • GPU: Radeon RX 6600 XT
  • RAM: 32GB DDR5
  • NVMe SSD: T-FORCE Z4 1TB
Here’s what I’ve tried so far:
  • I used the SysReport tool from OpenCore Debug version on this machine to dump the ACPI tables, including SSDT-EC, SSDT-HPET, SSDT-USBX, and SSDT-PLUG-ALT.
  • Then, I combined them with the EFI that previously worked on my Ryzen 9 9900X + ASUS B850 setup.
  • I double-checked all BIOS settings to make sure nothing was misconfigured (e.g., CSM disabled, Above 4G Decoding enabled, etc.).
However, I ended up with the following boot screen (see attached image).
At this point, I still cannot enter the macOS installer.
View attachment 18256

I’ve uploaded my config.plist for review — I’d really appreciate it if anyone could help check my config.plist, kernel patches, USBMap, and ACPI setup.
Thanks a lot for your help and guidance! 🙏



to start you left corecount of your previous CPU (12 cores i think)
9800x3d has 8!
 
  • Like
Reactions: unclesam
Hi @fabiosun

Thanks for taking the time to reply!
I really appreciate your work and all the guidance you’ve shared.
Its WORK now. 😊
 
  • Like
Reactions: fabiosun
I'm currently stuck at the macOS13 or 15 installer — the installation starts normally, but it always freezes midway through the process.
IMG_4516.jpeg
I've tried several times and it always stops at the same stage.

This is the first time I’ve encountered this issue — I’ve installed macOS many times before and never had this problem.
Does anyone have any suggestions or possible causes I should look into?

Thanks in advance for your help!
 
Last edited:
Post your EFI and exact hardware you have in your build :)
 
Post your EFI and exact hardware you have in your build :)
cpu: amd 9800x3d
mb: asus tuf-b850m-plus wifi7 w
ram: t-force ddr5 16gb*4
gpu: msi rx6600 xt 8gb
nvme ssd: micron crucial p510 1tb
sata ssd: intel 480g
efi:
 

Attachments

Last edited:
@unclesam why do you disable USB mapping?
 
@unclesam why do you disable USB mapping?
@fabiosun
I wanted to share a quick update.
My original plan was to make sure macOS 15 could be installed and run stably before doing the USB mapping process.
However, I ended up completing the USB mapping during a break in the installation process anyway.

After some testing, I found that the installer freeze issue was actually caused by my Micron Crucial P510 1TB NVMe SSD.
No matter which M.2 slot I used on my TUF B850M-Plus WiFi7 motherboard, the installation would always hang.
It seems that this SSD has some compatibility issues with the B850M platform.

Interestingly, when I tested the same P510 SSD on another motherboard (Intel B560M), it worked perfectly fine — no freezes or errors at all.
After switching to a different NVMe drive on the B850M board, the macOS installation went through smoothly and everything is now working great.

Thanks again for all your help and guidance!
 
@unclesam i asked in previous message your exact hardware because some doubts i had on usb or nvme used
my curiosity is if an installed OS in that disk works well in new B850M platform (bypassing installation steps which hangs in that chipset/motherboard)
 
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.