Glad that OpenCore works! I basically took the 0.7.7 posted here, and added a couple of changes required on my machine.Hi, I will test X570 Aourus Master and I want to ask you about providing USBmap.Kext or entire EFI? Thanks
Hi, i have an USB powered audio interface, the only trick i found it's to unplug it before the shut down, or shut down it after the restart in the buton at the bottom the opencore menu. I have try many tricks, but none of them with succes. I saw a thread in the forum about to fix the shut down, a big long conversation ending with no solution.Ok. Thx
Hi, thank you for the info. I don't know if I have a well mapped USB. I can ask you about sending your EFI ? We have almost the same device. ThanksHi, i have an USB powered audio interface, the only trick i found it's to unplug it before the shut down, or shut down it after the restart in the buton at the bottom the opencore menu. I have try many tricks, but none of them with succes. I saw a thread in the forum about to fix the shut down, a big long conversation ending with no solution.
Works great, tried your EFI on my Gigabyte Aorus X570 Pro WiFi using OpenCore 0.7.8 with MacOS Monterey 12.2.1.OpenCore 0.7.8 with MacOS Monterey 12.2.1 on Gigabyte Aorus X570 Pro WiFi
I though I'd post my latest EFI for people using the Gigabyte Aorus X570 Pro WiFi motherboard.
I was on MacOS Big Sur with the OpenCore version 0.7.0 for a very long time and decided to update both the OC and the MacOS. I first updated OC and config.plist following the official guides and made sure the existing install of BigSur was working fine. Then I went ahead and upgraded to the latest Monterey 12.2.1
Had a few hiccups with the upgrade process as it restarted a couple of times, but eventually the upgrade went through fine.
What doesn't work:
1. The onboard Intel l211 Ethernet does not work. As it is known now, the SmallTreeIntel82576.kext supporting this controller doesn't work on Monterey. So, I went ahead and bought a PCIe 2.5 Gigabit Realtek 8125 based card (Asus PCE-C2500 2.5GBase-T PCIe). This works great with the LucyRTL8125Ethernet kext. (Please disable it in config.plist if you are not using this card)
2. Onboard Bluetooth does not work. The resources say you can expect it to work with BluetoolFix include, but I haven't had success yet.
Other than this, everything else is working fine.
Build Specs:
- CPU: Ryzen 9 3900X
- Motherboard: Gigabyte AORUS X570 Pro Wifi (Bios Revision - F35)
- Graphics: Asus TUF Gaming RX 6800 XT
- Case : Lian Li PC-O11DW Dynamic XL
- NVMe: Western Digital WD SN850 1TB PCIe Gen 4
- Installed Operating Systems: MacOS Monterey | Windows 11 Pro
- Bootloader: OpenCore 0.7.8
View attachment 5289
Note:
- I've used the kexts SMCAMDProcessor & AMDRyzenCPUPowerManagement for power management and monitoring. If using monitoring, please also download the companion app - https://github.com/trulyspinach/SMCAMDProcessor
- The CPU core hex values need to updated in Kernel - Patches of the config.plist to match your AMD CPU config (Refer README here - https://github.com/AMD-OSX/AMD_Vanilla)
- Please use this EFI at your own risk. Make a backup of your existing MacOS install/data before you do any sort of upgrades.
I'm screwed on 0.7.9 will not get past the Apple logo
Nope that didn't help, same result.Interesting, I may try OC 7.8 & see if that helps.
Hi There,For me the solution to get 12.3 working was adding the AppleMCEReporterDisabler.kext
I also used the path to make the RX 5700 XT become W5700X and improve graphics performance:
Before updating to Monterey 12.3 Beta (21E5196i)
Apple have once again changed something that affects booting macOS on non Apple Hardware. However there is a simple fix. AppleMCEReporterDisabler.kext is required again to boot as something changed with the SMC. So for the time being include this kext in your EFI/Config to boot if you plan on...forum.amd-osx.com
Hi,For me the solution to get 12.3 working was adding the AppleMCEReporterDisabler.kext
I also used the path to make the RX 5700 XT become W5700X and improve graphics performance:
Before updating to Monterey 12.3 Beta (21E5196i)
Apple have once again changed something that affects booting macOS on non Apple Hardware. However there is a simple fix. AppleMCEReporterDisabler.kext is required again to boot as something changed with the SMC. So for the time being include this kext in your EFI/Config to boot if you plan on...forum.amd-osx.com
I put a link to AppleMCEReporterDisabler.kext. At your own risk !For me the solution to get 12.3 working was adding the AppleMCEReporterDisabler.kext
I also used the path to make the RX 5700 XT become W5700X and improve graphics performance:
Before updating to Monterey 12.3 Beta (21E5196i)
Apple have once again changed something that affects booting macOS on non Apple Hardware. However there is a simple fix. AppleMCEReporterDisabler.kext is required again to boot as something changed with the SMC. So for the time being include this kext in your EFI/Config to boot if you plan on...forum.amd-osx.com
Another one with X570 Master and having sleep-shutdown issue, cant figure out why, i have fully mapped usb, ssdt for tb3, cant figure out what is the problem
sleep hasn't worked for me for sometime, shutdown has not been an issue though.