MacOS 13 Ventura

[walidur234]

Check to: SetApfsTrimTimeout=0

if i'm not wrong, SetApfsTrimTimeout=0 is to disable the trim feature.
isn't that bad for SSD?

 

[Shaneee]

OpenCore dev team on the ball again https://github.com/acidanthera/OpenCorePkg/pull/357

 

[mmp369]

Check to: AvoidRuntimeDefrag = False, AdviseFeatures = True

Thanks for the reply but the problem is still stuck in the logo and language selection

 

[Middleman]

Thanks for the reply but the problem is still stuck in the logo and language selection

Try to disable the WiFi driver if you have one.

 

[mmp369]

Try to disable the WiFi driver if you have one.

hello how to disable bcm943602cs

 

[Middleman]

hello how to disable bcm943602cs

You need to check your config.plist in your EFI folder and see if you have a WiFi driver enabled, typically it should be Airportitlwm or Airportbrcm. Simply edit your config file using either Propertree or Plist Editor. Look for it under Kernel > Add > Item and set Enable to NO.

 

[mmp369]

You need to check your config.plist in your EFI folder and see if you have a WiFi driver enabled, typically it should be Airportitlwm or Airportbrcm. Simply edit your config file using either Propertree or Plist Editor. Look for it under Kernel > Add > Item and set Enable to NO.

problem solved thanks

 

[mmp369]

Do you have time to look at my configuration for me? thanks

Hello, my problem has been solved, format the hard disk and install the official version of mac12.4, upgrade the test version of mac13 online, and the installation is successful.

 

[ccphuc]

please give me your efi folder setup ventura 13

 

[mmp369]

Computer model MSI MS-7B89 desktop computer (scanning time: June 14, 2022)
Operating System Windows 10 Pro Lite 64-bit ( 4.09.00.0904 )

Processor AMD Ryzen 3 2200G with Radeon Vega Graphics Dual Core
Motherboard MSI B450M MORTAR MAX (MS-7B89) ( AMD PCI Standard Host CPU Bridge - LPC Controller B450 Chipset )
Memory 24 GB (Samsung DDR4 2133MHz / Kintek DDR4 2667MHz)
Primary Hard Drive TIGO NVMe SSD 256GB ( 256 GB / Solid State Drive )
Graphics Nvidia GeForce GT 640 ( 2 GB / Zotac )
Display Samsung SAM0B3B S22D300 (21.7 inches)
Sound Card Realtek ALC892 @ AMD High Definition Audio Controller
Network card Broadcom Broadcom 802.11ac Network Adapter / Apple

 

[iXak]

After installation, i stuck here (I don't even get to language selection / create account). 1-2 min system freeze and reboot.

 

[mmp369]

After installation, i stuck here (I don't even get to language selection / create account). 1-2 min system freeze and reboot.
View attachment 6120

Is it the online upgrade of 13 after installing the 12.4 version on the grid? I succeeded after this operation. I cannot install the Kepler graphics card driver under 12.4, otherwise it will restart infinitely. After installing the 12.4 version directly, other drivers are not installed, and then try to upgrade the 13 version online.

 

[Deleted member 11930]

Mission complete!

 

[p2mmao]

I managed to upgrade from 12.4 to 13beta with an MSI B550M Mortar Wi-Fi motherboard, EFI see attachment

 

[uzmi]

 

[neux.gabux]

I managed to upgrade from 12.4 to 13beta with an MSI B550M Mortar Wi-Fi motherboard, EFI see attachmentView attachment 6139

Hi p2mmao,
I've similar motherboard but non-WiFi version and CPU is Ryzen 7 3700x.
If I would like to use your EFI, is there something I need to tweak?

 

[m0>]

I'm using an x570 board, 3700x and an RX 6800 XT. Are my present boot args (npci=0x2000 agdpmod=pikera alcid=29) still needed for Ventura beta?

 

[Middleman]

I'm using an x570 board, 3700x and an RX 6800 XT. Are my present boot args (npci=0x2000 agdpmod=pikera alcid=29) still needed for Ventura beta?

Yes, for certain.

 

[iXak]

After installation, i stuck here (I don't even get to language selection / create account). 1-2 min system freeze and reboot.
View attachment 6120

I fixed this problem.
Removed WhateverGreen.kext and Boot Arg. Added DeviceProperties -> ATY, Henburg.
This fixed the gray screen and strange electrical/buzzing noise from GPU.