Congrats, I am still stuck are you using AppleMCEReporterDisabler.kext and RestrictEvents.kext?
yes on bothCongrats, I am still stuck are you using AppleMCEReporterDisabler.kext and RestrictEvents.kext?
Thanks.
That is more likely to be an issue of you including AppleALCU.kext in your /OC/Kexts folder than anything Wireless/BT connected.
The three kexts you need for Intel WiFi/BT card in MacOS Monterey are as follows:
You should not be using the IntelBluetoothInjector.kext when booting Monterey.
- AirportItlwm.kext (Monterey version 2.1.0)
- BlueToolFixup.kext
- IntelBluetoothFirmware.kext
The three kexts are attached below.
OC 0.7.7 & Monterey 12.2 work fine here!
I did an upgrade from Big Sur. I just had to disable the Intel NIC, and use the Realtek one instead.
However I cannot get the OpenCore GUI working again. I cross-checked every configuration setting with the guide, and everything seems to be OK. Is anybody else also affected by this cosmetic issue?
There is a bug with AMD X570 motherboards, mic inpu-outputs are not working, you have to use usb mic, if you have type-c or bluetooth headphone their mics will be workingHi guys, sounds work good but my analog microphone not working, any help?
Maybe i can use usb audio dongle for my mic? Compatible with macOS?There is a bug with AMD X570 motherboards, mic inpu-outputs are not working, you have to use usb mic, if you have type-c or bluetooth headphone their mics will be working
Maybe i can use usb audio dongle for my mic? Compatible with macOS?
Any USB dongle would work. I've used this in the past, https://amzn.to/3PCcv1V
HI, no changes after replacingTry replacing SSDT-USBX.aml with SSDT-EC-USBX-AMD.aml and see if that helps.
Copy of the SSDT is attached below.
Don't forget to change the config.plist > ACPI entry to match the name of the new SSDT.
Yes, my Big Sur USB installer and Big Sur OC both load perfect, but when I download the Monterey USB installer, I get stuckHave you checked you have your bios options set correcty for using macOS and OpenCore? As shown below.
Disable
Enable
- Fast Boot
- Secure Boot
- Serial/COM Port
- Parallel Port
- VT-d (can be enabled if you set DisableIoMapper to YES)
- CSM
- Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
- Intel SGX
- Intel Platform Trust
- CFG Lock (MSR 0xE2 write protection) (This must be off,
- if you can't find the option then enable AppleXcpmCfgLock under Kernel > Quirks. Your hack will not boot with CFG-Lock enabled)
- VT-x
- Above 4G decoding
- 2020+ BIOS Notes: When enabling Above4G, Resizable BAR Support may become available on some Z490 and newer motherboards.
- Please ensure this is Disabled instead of set to Auto.
- Hyper-Threading
- Execute Disable Bit
- EHCI/XHCI Hand-off
- OS type: Windows 8.1/10 UEFI Mode
- DVMT Pre-Allocated(iGPU Memory): 64MB
- SATA Mode: AHC