right ? on no!Switching from A320 to a B550 you basically have to redo your entire EFI
"Ctlnaahciport. Kext" and "xhci unsupported. Kext" were added later in the test. He was like this when he didn't join againACPI paths are usually different between different models with the same chipset, sometimes even between different BIOS versions. Same for USB ports.
CtlnaAHCIPort.kext and XHCI-unsupported.kext are not needed on B550.
I downloaded a MSI b550m EFI from GitHub, and the same problem occurredACPI paths are usually different between different models with the same chipset, sometimes even between different BIOS versions. Same for USB ports.
CtlnaAHCIPort.kext and XHCI-unsupported.kext are not needed on B550.
Then verify your BIOS settings
CPU : AMD Ryzen 5 3500XPlease provide you full hardware list, that makes it easier to help. Some older GPUs don't handle Above 4G Decoding well for example.
Maybe this is of help: https://dortania.github.io/OpenCore...tion-begins-previous-shutdown-hpet-hid-legacy
Thank you. I'll tryWith such an old card better disable Above 4G Decoding and add thenpci=0x2000
boot arg
Try adding in your efi folder: SSDT-AWAC.aml
Erm…….Try adding in your efi folder: SSDT-AWAC.aml
Erm... I have an amd setup and that aml works perfectly for me..Erm…….
Thats not going to work as you can’t use a Intel ssdt for a legacy real time clock fix on a AMD setup.
That’s just a NoNo I’m afraid.
It’s not doing anything I bet. It’s just sitting in There. Check your io reg and see for yourself.Erm... I have an amd setup and that aml works perfectly for me..
KkkIt’s not doing anything I bet. It’s just sitting in There. Check your io reg and see for yourself.
your using a SSDT that I promise you is doing zero