Solved stuck at End random seed please help
- Thread starter santosh mareddy
- Start date
-
Hello Guest. Before you post check the Troubleshooting guide here, Dortania Troubleshooting
BIOS Settings
- Enter BIOS -> Press Delete -> Enter Setup
- Exit -> Load Optimised Defaults
- Ai Tweaker -> Ai Overclock Tuner -> D.O.C.P.
- Advanced -> PCI Subsystem Settings -> Above 4G Decoding -> Disabled
- Advanced -> PCI Subsystem Settings -> Re-Size BAR Support -> Disabled
- Advanced -> USB Configuration -> Legacy USB Support -> Auto
- Boot -> Boot Configuration -> Fast boot -> Disabled
- Boot -> CSM -> Launch CSM -> Disabled
That fault you have now tends to mean that your USB installer is incorrect.
most common fault is creating the installer in windows and getting the format wrong.
you might need to remake the installer.
il make the change to the EFI now anyway but itās unrelated to the fault you have now.
most common fault is creating the installer in windows and getting the format wrong.
you might need to remake the installer.
il make the change to the EFI now anyway but itās unrelated to the fault you have now.
EFI with added boot argument nv_disable=1
I think the last version I sent you is correct though.
Its that one or this one.
Still though your USB Installer seems borked.
Make sure when you format the USB Stick that its using a GUID Partition Map and not Fat32 etc
I think the last version I sent you is correct though.
Its that one or this one.
Still though your USB Installer seems borked.
Make sure when you format the USB Stick that its using a GUID Partition Map and not Fat32 etc
If you can get to the installer main page like you are then the problem isnāt the EFI or you wouldnāt be able to get that far.
Everytime I have seen a usb installer doing what yours is doing it has been due to the USB installer being created via windows incorrectly.
Its the one thing I canāt do anything about from here Iām afraid.
I will try one more thing now for you but I doubt it will make any difference.
brb
Corrected EFI number god knows lol
Its exactly the same bar one change to a Kext that was not compatible with High Sierra, I don't think it will make any difference but it is a needed correction anyway.
Its exactly the same bar one change to a Kext that was not compatible with High Sierra, I don't think it will make any difference but it is a needed correction anyway.
You need to install the web Drivers for your card.
Quadro & GeForce macOS Driver Release 378.10.10.10.15.114 | 378.10.10.10.15.114 | | NVIDIA
Download the English (US) Quadro & GeForce macOS Driver Release 378.10.10.10.15.114 for systems. Released 2017.9.27
www.nvidia.com
In the config.plist under NVRAM you need to remove the boot argument nv_disable=1 before installing the drivers and in the config.plist under Misc-> Security set SecureBootModel to Disabled instead of j137.
Thats it
its not working sirYou need to install the web Drivers for your card.
Quadro & GeForce macOS Driver Release 378.10.10.10.15.114 | 378.10.10.10.15.114 | | NVIDIA
Download the English (US) Quadro & GeForce macOS Driver Release 378.10.10.10.15.114 for systems. Released 2017.9.27www.nvidia.com
In the config.plist under NVRAM you need to remove the boot argument nv_disable=1 before installing the drivers and in the config.plist under Misc-> Security set SecureBootModel to Disabled instead of j137.
Thats it
Update to the latest version of High Sierra first. Then go to about this Mac and click on the version. It'll now show the build number. 17G14042 should be the latest but let me know what you get and I'll link the web driver for it. Each build requires a different version.