Sonoma 14.5 black screen after awake

[kroaity]

Hello alltogether,

I've recently built an EFI based on the OpenCore guide and GitHub https://github.com/mikigal/ryzen-hackintosh for Sonoma 14.5. Everything runs smoothly except for two issues:

1. After sleep, the system fails to wake up. The monitor lights up but then shows "no signal" and repeats this process.
2. The system automatically restarts after shutting down.

I have followed the sleep troubleshooting guide on OpenCore but have not made any progress. Additionally, I tried using HibernationFixup.kext without any success. I suspect the issue might be related to the iGPU, but I've already disabled it in the BIOS and used the -wegnoigpu parameter to no avail.

My hardware is as follows:

• CPU: R7 7700
• Motherboard: Asrock B650M PG Riptide
• GPU: XFX RX 580 2304sp (with Sapphire BIOS)
• RAM: 32 GB (2x16GB) Adata DDR5 6000Mhz CL32
• Wifi/BT: None
• Opencore version: 1.0.0

By the way, is there any way to log in this situation? Debugging is too difficult without logs.

 

[Edhawk]

Do you have a custom USB configuration, I.e. USBMap.kext or UTBMap.kext & USBToolBox.kext defined for your system?

The lack of a custom USB configuration or an incorrect configuration are the most common reasons for the problems that you are experiencing.

 

[kroaity]

Hi Edhawk, Thank for the relpy

Follow your advise, I have tried using USBtoolBox to build a custom USB mapping (By the way, how could I know it is correct or not ?), now the issue of auto-restart is solved.

But the it's still can't awake from sleep. I also found that after the modification, the power switch makes the same sound when entering sleep mode as it does when powering on.

Anyway, thanks again , solving one problem is already a significant step forward.

 

[Edhawk]

You need to check your systemwide power settings in macOS. Editing these settings may help with your sleep/wake issues.

See this post over at Tonymacx86 for sleep/hibernate options.

https://www.tonymacx86.com/threads/hibernate-mode-desktop-for-clover-configurator.329029/post-2396861

If you post a screenshot showing the Hackintool > Power tab or the output from the sudo pmset -g Terminal command we can discuss any additional commands you might need.

 

[kroaity]

Hi Edhawk

There is my power setting, I follow the 'Fixing sleep' section in Opencoe

 

[kroaity]

I follow the guide https://www.insanelymac.com/forum/t...-boot-args-darkwake8-darkwake10-are-obsolete/
And the output is
2024-07-07 00:58:38 -0700 Sleep Entering Sleep state due to 'Software Sleep pid=180':TCPKeepAlive=disabled Using AC (Charge:0%) 7 secs
2024-07-07 00:59:02 -0700 Wake DarkWake to FullWake from Normal Sleep [CDNVA] : due to HID Activity Using AC (Charge:0%)

Does this indicate that the sleep function is working properly?

I also discovered that after the machine wakes up (the display turns on but shows a black screen), the keyboard input is recognized. The evidence is that a folder on my desktop was renamed, and the new name contains not only some meaningless characters but also my login password (meaning that all the random characters I typed on the keyboard during the wake-up process were accepted).