Sequoia on Asus Vivobook X512DA

[moishiteru]

Hi everyone, i have successfully install sequoia on this notebook but now I have some issue:

Touchpad does not work (have tried some kexts without success)

Audio can not found the right codec??? Asus website says ALC3251 (I don't find ALC 3251 with some tutorial) i'm tried tutorial for VoodooHDA from Max.1974 but VoodooHDA does not detect my sound card

Wifi intel 8260 no luck with itlwm and heliport app with Airportltlwm too

Really frustrated now just i want to get working is wifi and audio (don't care touchpad and BT anymore)
please help
Thank you

 

[moishiteru]

what's work now:

Graphic Vega 8 (Metal 3) but don't think fully supported
Audio with VoodooHDA.kext in Efi folder (thanks to Max.1974)
Wifi 8260 works with itlwm and Heliport (for people does not work at the first time like me after reboot don't forget to delete plist here)

Micro SD card reader with RealtekCardReader.kext and RealtekCardReaderFriend.kext

don't work:
BT BCM 4350C2 (no luck for BT still looking for it)
Camera
Touchpad

 

[Edhawk]

Camera and Bluetooth not working will be caused by USB configuration issues. These 2 x USB Internal ports need to be set with the correct connector type (255).

 

[moishiteru]

Camera and Bluetooth not working will be caused by USB configuration issues. These 2 x USB Internal ports need to be set with the correct connector type (255).

thank you for reply but how to set the correct connector type (255)??? do you mean usb remapping? I do that on windows 11 before install sequoia can you help me to set the correct connector type (255)?

 

[Edhawk]

You can set the correct port Type, using the formula provided in the USBToolBox window, i.e. Tort number, port number:255

Alternatively, you can edit the UTBMap.kext you have created, assuming you know which ports are serving the Camera and Bluetooth module.

 

[moishiteru]

sure thank you i will do that, finally i don't know which ports how to know that?

 

[moishiteru]

BT works now (i have only update heliport to version 2.0.0 alpha release) scan devices but can not connect

 

[Edhawk]

Heliport has nothing to do with the Bluetooth module. It is an application that enables the Intel WiFi to be recognised by macOS as an Ethernet network device.

If the Bluetooth is scanning but not connecting then it isn’t working. What does the System Information- Bluetooth report and Hackintool - System - Peripherals tab show regarding the Bluetooth device?

 

[moishiteru]

BCM 4350C2 Broadcom? is it normal on an intel card?

 

[Edhawk]

When the Intel Bluetooth module shows as BCM_4350C2 it means the module is not being identified correctly by the OS.

This is usually but not always related to the discovery and activation of the Bluetooths USB port. It can also be caused by changes to the Bluetooth stack in the OS, which Apple have a habit of messing with. Plus incompatibility between the BT kexts and the new OS.

It should show with the name “Third-Party-Dongle” or something similar, In both locations.

 

[moishiteru]

ok now i understand thank you

 

[Edhawk]

Here are a few screenshots showing the Intel AX200 Bluetooth module settings from my X570-F system, it is running Sonoma 14.7 so both my Intel WiFi & BT work.

Hackintool > System > Peripherals tab - Third_Party_Dongle shown for Intel Bluetooth

System Information > Bluetooth report - again Third_Party_Dongle shown for Intel Bluetooth

System Information > USB report - Bluetooth module connection shown as - USB Bluetooth Host Controller.

If you don't have the same naming and USB connections then your Bluetooth won't work.

 

[moishiteru]

okay, i progress to my Hackintosh to get working well, camera is out (this is the reason can not get it work)
now I need to get work the touchpad , with all Fn keys on the keyboard too? do you think DSDT patch can fix that???

 

[moishiteru]

after fresh install Sequoia boot sucessfully
What' working now:
Graphics (but something wrong when i want to replace my avatar freeze system then reboot)
Audio with https://chefkissinc.github.io/newsroom/applealc-sequoia/
Fn keys
Wifi with Heliport and itlwm.kext
BT works with BluetoolFixup.kext and IntelBluethootFirmware.kext scan devices, connect but disconnected immediatly

don't work:
touchpad
Sd car reader (Realtekcardreader.kext and RealtekcardreaderFriend.kext) does not seem to detect

Need help to get working the touchpad

https://www.mediafire.com/file/r2jrxhmdbo6kvam/EFI.zip/file

 

[tascoEleven]

after fresh install Sequoia boot sucessfully
What' working now:
Graphics (but something wrong when i want to replace my avatar freeze system then reboot)
Audio with https://chefkissinc.github.io/newsroom/applealc-sequoia/
Fn keys
Wifi with Heliport and itlwm.kext
BT works with BluetoolFixup.kext and IntelBluethootFirmware.kext scan devices, connect but disconnected immediatly

don't work:
touchpad
Sd car reader (Realtekcardreader.kext and RealtekcardreaderFriend.kext) does not seem to detect

Need help to get working the touchpad

https://www.mediafire.com/file/r2jrxhmdbo6kvam/EFI.zip/file

The trackpad is I2C?

 

[moishiteru]

i'm not sure its an ELAN1200 precision touchpad

 

[scareface]

hi, I successfully installed this on my X512DA, but audio, wifi and bluetooth doesn't work, can anybody help?

 

[Edhawk]

Which WiFi/BT card are you using? Is it a macOS compatible device?

Which Audio codec does your system use? Are you using AppleALC.kext, with the appropriate layout-id set in your config.plist?

 

[scareface]

Audio works now, wifi card is:
Intel(R) Wi-Fi 6E AX210 160MHz

 

[Edhawk]

You need to add Itlwm.kext to your OC setup. Then install the Heliport application for the Intel WiFi to work in Sequoia. As AirportItlwm.kext hasn’t been updated for Sequoia.

For the Intel Bluetooth you need to add three kexts, in the following order.

IntelBluetoothFirmware.kext
IntelBTPatcher.kext
BlueToolFixup.kext

Plus these NVRAM entries are required in the config.plist.



The Config-Intel-BT.plist attached below contains the necessary Bluetooth entries.

Plus of course the USB port that the Bluetooth module connects to needs to be active, enabled and set with the correct Connector Type (Internal/255) in your USB kext.