Kernel Panic during Ventura Installation
- Thread starter nocaptony
- Start date
-
Hello Guest. Before you post check the Troubleshooting guide here, Dortania Troubleshooting
Make sure you are using the latest releases of the kexts. Specifically AMDRyzenCPUPowerManagement.kext and SMCAMDProcessor.kext. As the previous release of SMCAMDProcessor.kext (0.7.0) doesn't work in macOS Ventura, it causes a KP during the boot process.
github.com
Can you post a screen image of the KP. As that might tell us what is causing the KP.
Releases · trulyspinach/SMCAMDProcessor
Power management, monitoring and VirtualSMC plugin for AMD processors - trulyspinach/SMCAMDProcessor
github.com
Can you post a screen image of the KP. As that might tell us what is causing the KP.
Make sure you are using the latest releases of the kexts. Specifically AMDRyzenCPUPowerManagement.kext and SMCAMDProcessor.kext. As the previous release of SMCAMDProcessor.kext (0.7.0) doesn't work in macOS Ventura, it causes a KP during the boot process.
Releases · trulyspinach/SMCAMDProcessor
Power management, monitoring and VirtualSMC plugin for AMD processors - trulyspinach/SMCAMDProcessor
Can you post a screen image of the KP. As that might tell us what is causing the KP.
Here is a picture of the screen. I tried putting in the most recent kexts as you linked but still to no avail. All of the panics have occurred at this spot, where IOG flag 0x3 (0x51) always pops up. Thanks for the reply.
You have the Kernel > Emulate > DummyPowerManagement entry set as False, it should be set as True.
I have edited your EFI, specifically the config.plist, making the change listed above and cleaning up the config to remove a number of placeholder entries you don't need with your AMD system.
Try this revised OC EFI and see if this works any better.
I have edited your EFI, specifically the config.plist, making the change listed above and cleaning up the config to remove a number of placeholder entries you don't need with your AMD system.
Try this revised OC EFI and see if this works any better.
Thanks for taking the time to revise the EFI. I tried it, but still didn't work. The installer keeps panicking at about the same place, I have two pictures of the screen. See attached below.
I used the second rendition of the EFI and added the AppleMCEReporterDisabler kext to it and I finally got macOS Ventura installed. Thank you both so much for the help. Just one more thing: the CPU is showing up as unknown in the system information tab. Is there any fix to this? See image attached below. Also attaching the new EFI just in case it is needed.
Yep, that fixed it. Thank you both so much for the help once again.
