bonjour apres avoir fait le tuto de la mise a jour de securite 2019 005 shanee tout fonctionne parfaitement sauf l'arret repart en boucle
Merci pour ton aide
highsierra 10.13.6
AMD fx 8350
gigaoctet GA-9701-DSP3
ssd 240gb
ram corsaire 4gb x2
MSi GeForce GT 710 2048 Mo
I have been playing around with my old AMD FX 8350 system (again) and decided to see if I could get it running macOS Big Sur. I used OpenCore 0.7.6 and followed the Dortania AMD Bulldozer guide when creating the EFI folder. I created my macOS Big Sur USB installer using the following...
I have been playing around with my old AMD FX 8350 system (again) and decided to see if I could get it running macOS Big Sur. I used OpenCore 0.7.6 and followed the Dortania AMD Bulldozer guide when creating the EFI folder. I created my macOS Big Sur USB installer using the following...
Hello, thank you for your answer
i used your efi and i installed catalina i still have the problem
the computer restarts fine but does not shut down
I don't have the same motherboard as you but everything seems to work
gigabyte 970a-ds3p fx8350
and the audio codec does not work it is not an alc
Hello, thank you for your answer
i used your efi and i installed catalina i still have the problem
the computer restarts fine but does not shut down
I don't have the same motherboard as you but everything seems to work
gigabyte 970a-ds3p fx8350
and the audio codec does not work it is not an alc
hello it's me again. the problem is that i don't know how to compile the patches i downloaded maciASL moreover i also don't know how to change the audio codec
I managed to modify the plist configuration for the ethernet codec
but it's not obvious, wouldn't there be a tutorial explaining the compilation?
Thanks
hello i used your efi file to install big sur 11.6.1 on my gigabyte 970a-ds3p motherboard amdfx8350 and it works very well
except audio
I used the voodookext
but it is not charging
invalid parameter
would you be kind enough to help me thank you
hello it's me again. the problem is that i don't know how to compile the patches i downloaded maciASL moreover i also don't know how to change the audio codec
I managed to modify the plist configuration for the ethernet codec
but it's not obvious, wouldn't there be a tutorial explaining the compilation?
Thanks
It is an old system. So it may use a different names for the USB controllers. You are also likely to have a system with multiple USB controllers.
For example my Asus Sabertooth FX990 R2.0 has 3 xASMedia USB controllers, 3 x EHCI USB controllers, 3 x OCHI0 USB controllers and 1 x OCHI2 USB controller.
The ASMedia controllers work Out of the Box (OOB) at USB3 and USB2 speed (5 Gb/s & 480 Mb/s)
The EHCI and OCHIx controllers only work at USB1.1 speed (12 Mb/s), which is fine for mouse, keyboard or Webcam. But rubbish for anything requiring faster connection.
Because of this I have installed a USB PCIe card that provides 5 x external USB3 ports and a 19-pin case front connector. This card uses a Fresco Logic USB controller (FL1100), which works out of the box in macOS.
Have a look in Hackintool > PCIE devices tab to see which USB controllers are present in your system.
A copy of the pcidevices.txt from my Sabertooth system is attached below, with the USB controllers highlighted.
Your motherboard is of a similar age so will probably use similar USB controllers.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.
