- Joined
- Mar 23, 2022
- Messages
- 2
AMD RYZEN 5 4600H with RADEON GRAPHICS
NVIDIA GTX 1650ti
8GB RAM
NVIDIA GTX 1650ti
8GB RAM
Hi there,AMD RYZEN 5 4600H with RADEON GRAPHICS
NVIDIA GTX 1650ti
8GB RAM
Sure, any way I can install Monterey or an earlier version of MACOS right now?Hi there,
Regarding your setup unfortunately it’s a little tricky. Officially it is currently unsupported because of your AMD IGPU and the fact that it uses an Nvidia GTX1650 which was never supported by macOS. That said there are developments currently underway for enabling the AMD IGPU (WhateverRed) but these are not yet ready for release.
Yes, you can install up to Ventura. But you won't have hardware acceleration which will make macOS laggy.Sure, any way I can install Monterey or an earlier version of MACOS right now?
You could try my Opencore EFI build here. I use an Atari VCS console which has an AMD Picasso/Raven APU but the file and process remains the same > https://www.tonymacx86.com/threads/guide-atari-vcs-2020-console.309903/Sure, any way I can install Monterey or an earlier version of MACOS right now?
If you're going to recommend your EFI to people, update it regularly and don't include a bunch of useless SSDTs and Kexts.You could try my Opencore EFI build here. I use an Atari VCS console which has an AMD Picasso/Raven APU but the file and process remains the same > https://www.tonymacx86.com/threads/guide-atari-vcs-2020-console.309903/
You will need to change the core count under the Kernel > Patches section in the config.plist to match the cores in your current system which should be 6.
Instructions on that can be found here > https://github.com/AMD-OSX/AMD_Vanilla
You will also need to put in -wegnoegpu under the NVRAM boot-args section to disable your Nvidia GTX1660.
Instructions on creating a bootable macOS USB installer are found here > https://dortania.github.io/OpenCore-Install-Guide/installer-guide/mac-install.html
I'm sorry but I don't think that's your concern? I will update it as and when I wish, or when I think that it's necessary.If you're going to recommend your EFI to people, update it regularly and don't include a bunch of useless SSDTs and Kexts.
Would WhateverRed add support for AMD 6800H iGPU?Hi there,
Regarding your setup unfortunately it’s a little tricky. Officially it is currently unsupported because of your AMD IGPU and the fact that it uses an Nvidia GTX1650 which was never supported by macOS. That said there are developments currently underway for enabling the AMD IGPU (WhateverRed) but these are not yet ready for release.
No and don't think they will (add support). However do not think it is necessary.Would WhateverRed add support for AMD 6800H iGPU?
No, I don’t have a 5800/6800H notebook currently. But considering to buy one if it would be supported by hackintosh. Until now, I see most of success install are in desktop. Only very few notebooks are supported. I think it would be a great step forward if AMD notebook’s igpu would be supportedNo and don't think they will (add support). However do not think it is necessary.
FYI I have successfully achieved booting on an AMD Ryzen APU before using VESA mode on my Atari VCS, and recently I made an updated version of my bootable EFI.
If you are willing to test, I've created an EFI recently for Ryzen 5800H/6800H IGPUs here which you can try.
Actually you are wrong about that. There have been recent successes too on laptop with the 5800H + RX6600M Lenovo Legion 5No, I don’t have a 5800/6800H notebook currently. But considering to buy one if it would be supported by hackintosh. Until now, I see most of success install are in desktop. Only very few notebooks are supported. I think it would be a great step forward if AMD notebook’s igpu would be supported
Lenovo Legion is a very good gaming laptop. But it is still too heavy and thick for convinience.Actually you are wrong about that. There have been recent successes too on laptop with the 5800H + RX6600M Lenovo Legion 5
不,也不认为他们会(增加支持)。不过觉得没必要。
仅供参考,在我的 Atari VCS 上使用 VESA 模式之前,我已经成功地在 AMD Ryzen APU 上实现了启动,最近我制作了可启动 EFI 的更新版本。
如果你愿意测试,我最近在这里为 Ryzen 5800H/6800H IGPU 创建了一个 EFI,你可以试试。
Really, you created a 6800H igpu's efi, I can try itNo and don't think they will (add support). However do not think it is necessary.
FYI I have successfully achieved booting on an AMD Ryzen APU before using VESA mode on my Atari VCS, and recently I made an updated version of my bootable EFI.
If you are willing to test, I've created an EFI recently for Ryzen 5800H/6800H IGPUs here which you can try.
Yes.Really, you created a 6800H igpu's efi, I can try it
Do I need to send you a copy of my bois to see how?Yes.
@Middleman, is it the same one you shared on the other post. I'm also looking to Whateverred project that may provide a solution to AMD APUs.Yes.
Yes@Middleman, is it the same one you shared on the other post. I'm also looking to Whateverred project that may provide a solution to AMD APUs.
Hi bro, can you help me, i tried to boot with your folder on a AMD Ryzen 4500U with Radeon Vega 6 but i get stucked on this message (not an error i think, even if there are some errors befor the stucking):Actually you are wrong about that. There have been recent successes too on laptop with the 5800H + RX6600M Lenovo Legion 5
AMDCPUSupport v0.7.1, init
AMDCPUSupport::enter dllnklng..
vh: 4294967168, vl: 492896256
Did you change the Kernel > Patch core count according to the AMD Vanilla Github guide?Hi bro, can you help me, i tried to boot with your folder on a AMD Ryzen 4500U with Radeon Vega 6 but i get stucked on this message (not an error i think, even if there are some errors befor the stucking):
Code:AMDCPUSupport v0.7.1, init AMDCPUSupport::enter dllnklng.. vh: 4294967168, vl: 492896256
Then i found this file .txt above my EFI folder (i think that's the log file) :
I put last release opencore on you folder (Opencore 0.8.5)
I attached my EFI Folder with config.plist, maybe i make something wrong !
can you please provide me a EFI file for ryzen 5 5600h and a proper guide. I have LENOVO IDEAPAD GAMING 3 (15ACH6), and i also able to disable my gtx-1650 through bios.Did you change the Kernel > Patch core count according to the AMD Vanilla Github guide?