Black screen with refresh rates over 120hz

D

Deleted member 12783

New member
AMD OS X Member
Sep 8, 2021
15
3
3
CPU:
Ryzen 3600
Is this something anyone here had managed to fix? I’m using an RX 5700XT. I am on Monterey right now but had the same issue on Big Sur.


Sent from my iPhone using Tapatalk
 
Sort by date Sort by votes
atridad said:
Is this something anyone here had managed to fix? I’m using an RX 5700XT. I am on Monterey right now but had the same issue on Big Sur.


Sent from my iPhone using Tapatalk
Click to expand...
HDMI or DP? Because I'm in Monterey too at 144hz.
 
Upvote 0 Downvote
Have you tried with HDMI?
 
Upvote 0 Downvote
my AOC monitor connected directly to rx 5700xt via DP and set at 144hz with no blackouts, check your DP cable
 
Upvote 0 Downvote
To clarify, basically everything above this current refresh rate results in this issue. I was also wondering though, I did flash my 5700 with 5700XT firmware. Could this be the culprit?
Screen Shot 2021-10-18 at 10.20.37 PM.png
 
Upvote 0 Downvote
atridad said:
To clarify, basically everything above this current refresh rate results in this issue. I was also wondering though, I did flash my 5700 with 5700XT firmware. Could this be the culprit?
Click to expand...
Quite possibly.

I honestly can't understand what you expected to gain with that flashing. Do you even see any meaningful performance increase, worthy of risking the entire card..?
It's not like all those disabled compute units will suddenly spring to life with new firmware. Even if that could somehow happen, there's a reason chip had those silicon parts disabled - if they were working properly, chip would be sold as pricier 5700 XT.
 
  • Like
Reactions: Aluveitie
Upvote 0 Downvote
atanvarno said:
Quite possibly.

I honestly can't understand what you expected to gain with that flashing. Do you even see any meaningful performance increase, worthy of risking the entire card..?
It's not like all those disabled compute units will suddenly spring to life with new firmware. Even if that could somehow happen, there's a reason chip had those silicon parts disabled - if they were working properly, chip would be sold as pricier 5700 XT.
Click to expand...
Only barely saw a benefit. Haven't noticed anything flakey on it and it is a dual bios card so no risk here.
 
Upvote 0 Downvote
atridad said:
Only barely saw a benefit. Haven't noticed anything flakey on it and it is a dual bios card so no risk here.
Click to expand...
Then switch to original BIOS for 5700 and see if black screens are gone. If not, something else is an issue.
 
Upvote 0 Downvote
atridad said:
To clarify, basically everything above this current refresh rate results in this issue. I was also wondering though, I did flash my 5700 with 5700XT firmware. Could this be the culprit?
View attachment 4206
Click to expand...


Hi... its all about your monitor. (M27Q)... Ive been experience that issue today. I just recieve today a Gigabyte M27Q and ive been getting mad all day... because as soon I change Herts over 120 i get a black screen.... Changing monitor to my old monitor and at same settings get signal straight away... So after a lot os testing the result is that M27Q is the problem... I updated the firmware of the monitor from F02 to F04 and didnt solve the problem.... HDMI works but DP NO.

Hope it helps and sorry for my poor english...

Cheers!
 
  • Like
Reactions: Deleted member 12783
Upvote 0 Downvote
I would try looking into your max resolution and refresh rate. I truly think it's just a Monterey beta issue (mentioned here), probably with the Max hz your device supported. The few times I've used my Mac with my monitor, I know it works at 60hz but I usually use it at 16:9 in pbp mode which is also 120hz.
 
Upvote 0 Downvote
ClemHarvey said:
I would try looking into your max resolution and refresh rate. I truly think it's just a Monterey beta issue (mentioned here), probably with the Max hz your device supported. The few times I've used my Mac with my monitor, I know it works at 60hz but I usually use it at 16:9 in pbp mode which is also 120hz.
Click to expand...

This happened on big sur too.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: palote99
Upvote 0 Downvote
palote99 said:
Hi... its all about your monitor. (M27Q)... Ive been experience that issue today. I just recieve today a Gigabyte M27Q and ive been getting mad all day... because as soon I change Herts over 120 i get a black screen.... Changing monitor to my old monitor and at same settings get signal straight away... So after a lot os testing the result is that M27Q is the problem... I updated the firmware of the monitor from F02 to F04 and didnt solve the problem.... HDMI works but DP NO.

Hope it helps and sorry for my poor english...

Cheers!
Click to expand...

Oof… I have another monitor I can test to verify so I’ll see if this is the case.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: palote99
Upvote 0 Downvote
You must log in or register to reply here.
Top Bottom
✖
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.