OpenCore 0.7.1 EFI Update (Monterey 12.0 Beta1 Ready), 5th July 2021
The EFI has now been expanded and usb has been fully mapped to included the X570 Pro, Pro Wifi and Ultra. No changes to the EFI are needed for any of the above boards, Just add your info and away you go. If you want to use the internal intel wifi and bluetooth combo card then make sure you download and instal the correct kexts from here.
https://github.com/OpenIntelWireless
The EFI has now been updated to the my latest version.
Changes made include,
- SMBIOS Changed to MacPro 7,1
- Lilu 1.5.4,
- AppleALC 1.6.2,
- WhateverGreen 1.5.1,
- VirtualSMC 1.2.5,
- RestrictEvents 1.0.3,
- OpenCore Updated to Revision 0.7.1 (Big Sur 11.5 Ready),
- AMD Patches Monterey 12.0 Beta1 Compatible,
- SIP Can now be toggled within OpenCanopy,
- OpenCanopy Icons Updated,
- Plus other minor tweaks and changes to the config.
IMPORTANT SMBIOS CHANGE - As requested by many the SMBIOS has now been switched over to MacPro7,1 if you want to continue using iMacPro1,1 then all you need todo is replace the USBMap.kext with the 1,1 version and add SSDT-XHC to your ACPI and your Config.plist, Change agdpmod=ignore into agdpmod=pikera and add your 1,1 details. I will add a 1,1 conversion kit to download incase you need it.
Make sure you sign out of all icloud services before swapping over to the 7,1 EFI and Do not try and carry across your old 1,1 details to SMBIOS 7,1. You will need to create new Personal SMBIOS Details for MacPro7,1.
If you are using your real UUID and MAC address from your motherboard then these can carry over but not the Serial Number and MLB, These will need to be regenerated.
Note 1 - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=ignore from the boot arguments.
Note 2 - If you are using a 6 or Less Core Ryzen then go into the Config,plist and under PlatformInfo->Generic Change the ProcessorType from 0 to 1537, This will list your CPU info correctly inside About This Mac.
Note 3 - The SmallTreeIntel82576.kext is not working under Monterey 12.0 so if you plan on playing around with the new OS for now make sure you use the 2.5GHz ethernet port or WiFi instead.
For OpenCore Using PlistEdit Pro add your details by modifying the following
Finally and as always, MAKE SURE YOU RESET YOUR NVRAM BEFORE BOOTING INTO THE NEW EFI.
OpenCore EFI Update V0.7.1 - 05/07/2021