AudioGod's ASUS ROG STRIX X570-E GAMING - Big Sur & Monterey Beta - OpenCore 0.7.4 EFI
- Thread starter AudioGod
- Start date
Installed Catalina. Everything works fine. The problem with the pops up was solved. I have three ssd disks and the problem was not with the boot ssd. After formatting the second ssd, the pops up (the disk you attached was not readable by this comp) disappeared.
Thank you very much for your work!
Thank you very much for your work!
I didn't like the performance on catalina (benchmarks cpu results about 5-7 percents lower than your). So I installed big sur but it turned out the same. now about this mac writes that the processor is unknown and the serial number is unavailable and results tne same in catalina.
My 5900X is tuned and it’s a review sample so don’t expect to hit my highs without a lot of work and fine tuning
This has happened because you didn’t read the notes on the update notice or the main page itself.
you need to set your core count on the new patches as it clearly states…
IMPORTANT - PATCH INFO FOR SETTING THE CORRECT CORE COUNT FOR YOUR CPU
Core Count patch needs to be modified to boot your system. Find the two algrey - Force cpuid_cores_per_package patches and alter the Replace value only.
Changing BA000000 0000/BA000000 0090* to BA <CoreCount> 0000 0000/BA <CoreCount> 0000 0090* substituting <CoreCount> with the hexadeciamal value matching your physical core count.
Note: The three different values reflect the patch for different versions of macOS. Be sure to change all three if you boot macOS 10.13 to macOS 12
See the table below for the values matching your CPU Core Count.
| CoreCount | Hexadecimal |
|---|---|
| 6 Core | 06 |
| 8 Core | 08 |
| 12 Core | 0C |
| 16 Core | 10 |
| 32 Core | 20 |
Or a 12 Core 5900X that I have it setup as standard would result in these replace values, BA 0C 0000 0000/BA 0C 0000 0090
If it’s not working with my EFI using my last or current version and you have set the core count correctly then it’s a problem on your end. The EFIs work just fine.
What GPU and what NVMe drive?
Also are you using the bios settings laid out on page one?
Did you remove agdpmod=ignore from the boot arguments?
You might need NVMeFix.kext for your Drive too.
Releases · acidanthera/NVMeFix
Contribute to acidanthera/NVMeFix development by creating an account on GitHub.
github.com
Have you made any other changes to the EFI or added anything else kext, driver or SSDT wise?
I see what's wrong now, You have lost Kernel info for one of the kexts.
Whatever your using to edit the config.plist with is messing up the config that's if its not you doing it.
Download the EFI again and add your SMBIOS details, Remove the boot argument and don't do anything else and try again and use PlistEditPro or Xcode to edit the Config with.
PlistEdit Pro
PlistEdit Pro is a handy little tool to edit your Config.plist with among other things.
forum.amd-osx.com
OKI see what's wrong now, You have lost Kernel info for one of the kexts.
Whatever your using to edit the config.plist with is messing up the config that's if its not you doing it.
Download the EFI again and add your SMBIOS details, Remove the boot argument and don't do anything else and try again and use PlistEditPro or Xcode to edit the Config with.
PlistEdit Pro
PlistEdit Pro is a handy little tool to edit your Config.plist with among other things.
I'll do it tomorrow and let you know. thanks again
In the first screen shot you sent the kext info is missing and in the second screenshot you sent it looks like your installer is locked.