Lenovo XiaoXin Pro16 AMD 5800H restarts when Monterey is installed

[Hendrix19]

My computer is a computer with no independent graphics card, the network card is Intel AX210, and the disk is WD SN730. During the installation process, every time the progress bar prompts that the installation will restart when the remaining 12 minutes are left, the EFI I use is from the EFI that has been successfully installed by others,here is the video link :https://b23.tv/r3fcRgB.Thank you so much for seeing this.

 

[Middleman]

Hi there,

Can you please post your EFI folder for us to check? As presently we have no way of knowing what is exactly wrong with your current configuration.
Remove your UUID system & ROM serials from the PlatformInfo section of the config.plist before doing so.

 

[Hendrix19]

Thanks for your reply,here is the EFI

 

[Middleman]

Okay @Hendrix19,

Give this EFI a try. I have made a number of changes to the EFI that should help it boot Ventura.

One of the main things I noticed in your EFI is that aside from a few extra unneeded kernel patches (27? vs latest 22) and a missing SSDT-CPUR for the CPU, you had forgotten to enable NootedRed.kext. As your 5800H only has an AMD IGPU it is an essential kext to be enabled in order to boot so I've done that for you. You had also missed adding items in your Tools folder, and forgotten to set the UEFI > Output > Init setting to Auto. For the Intel WiFi I have enabled all needed kexts for it and disabled IntelBluetoothInjector which is not required in the latest versions of macOS after Big Sur.

 

[Hendrix19]

Thank you so much,i will try it afternoon.Is this EFI compatible with Monterey or is it limited to Ventura？

 

[Middleman]

Thank you so much,i will try it afternoon.Is this EFI compatible with Monterey or is it limited to Ventura？

You're most welcome! The EFI should work with Monterey, Ventura & Sonoma (though you may have to change the Intel WiFi Airportitlwm.kext to appropriate macOS version as this one should be for Ventura). For Sonoma you may have to set the SecureBootMode to disabled in order to boot.

 

[Hendrix19]

Okay @Hendrix19,

Give this EFI a try. I have made a number of changes to the EFI that should help it boot Ventura.

One of the main things I noticed in your EFI is that aside from a few extra unneeded kernel patches (27? vs latest 22) and a missing SSDT-CPUR for the CPU, you had forgotten to enable NootedRed.kext. As your 5800H only has an AMD IGPU it is an essential kext to be enabled in order to boot so I've done that for you. You had also missed adding items in your Tools folder, and forgotten to set the UEFI > Output > Init setting to Auto. For the Intel WiFi I have enabled all needed kexts for it and disabled IntelBluetoothInjector which is not required in the latest versions of macOS after Big Sur.

Hello there,this is the Ventura file I used, and the error message "no such Progress" repeatedly appeared during the installation process.

 

[Middleman]

Okay @Hendrix19,

Try this updated EFI. I've added the device properties for the IGPU so it should work.

 

[Hendrix19]

@Middleman OK,It's stuck here, and I've always disabled the XHC10 interface, so it's probably not the interface that's causing the problem, because that's what I've seen in other tutorials.

 

[Hendrix19]

Okay @Hendrix19,

Try this updated EFI. I've added the device properties for the IGPU so it should work.

I tried again, and this time the error was different

 

[Middleman]

@Hendrix19,

Alright. I am assuming your USB ports also need a XHC rename like my B550 motherboard so I've added those in for you under the ACPI section.
Give it a try.

 

[Hendrix19]

Thank you for being so patient,i will try it