Hi Edhawk.
sorry for responding late.
For the first two questions, I have never installed macOS before.
For the third question, I think It did not boot to installation. I can not remember. I tried it around three months ago.
For the last question, No. I did not try it.
Try this OpenCore EFI folder it is built from the OC 0.7.9 release for an 8-core AMD CPU, using a B550 motherboard.
As you have an RX 6600 XT GPU you need to be installing macOS Monterey 12.1 or newer, otherwise your graphics won't work.
You also need to make sure you have your BISO set correctly to run macOS.
AMD BIOS Settings
Note: Most of these options may not be present in your firmware, we recommend matching up as closely as possible but don't be too concerned if many of these options are not available in your BIOS
Disable
Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
Compatibility Support Module (CSM) Must be off, GPU errors like gIO are common when this option is enabled.
Enable
Above 4G decoding (This must be off, as I have added npci=0x2000 to boot-args. Do not have both this option and npci enabled at the same time.)
If you are on a Gigabyte/Aorus or an AsRock motherboard, enabling this option may break certain drivers(ie. Ethernet) and/or boot failures on other OSes, if it does happen then disable this option and opt for npci instead
2020+ BIOS Notes: When enabling Above4G, Resizable BAR Support may become an available on some X570 and newer motherboards. Please ensure that Booter -> Quirks -> ResizeAppleGpuBars is set to 0 if this is enabled.
And I think last time I did not set bios that make it did not boot to the installation.
Then I tried to boot with my EFI again. It booted to the Mac installation. The page has disk utility.
But It just one time can boot to that page. After that, I always get Kernel Panic like this
I tried to set SetupVirtualMap to true but it still has the same issues.
What version of Monterey are you trying to install? Your RX6600 XT GPU is only supported from 12.1. or newer.
Could be up against the same issue some MSI board users have faced where they can't install macOS Monterey. Some have been fortunate, in that the installation progressed when they downgraded their Bios, to an older version. Others have installed Big Sur, where the same MSI issues haven't occurred.
With the RX6600 XT you don't have a choice about which version of macOS to install , you have to run Monterey 12.1 or newer for your GPU to be recognised and work.
What version of Monterey are you trying to install? Your RX6600 XT GPU is only supported from 12.1. or newer.
Could be up against the same issue some MSI board users have faced where they can't install macOS Monterey. Some have been fortunate, in that the installation progressed when they downgraded their Bios, to an older version. Others have installed Big Sur, where the same MSI issues haven't occurred.
With the RX6600 XT you don't have a choice about which version of macOS to install , you have to run Monterey 12.1 or newer for your GPU to be recognised and work.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.