After AGESA ComboPI 1.0.0.7a updated bios, my system isn't open. what could be the problem?
- Thread starter mumin16
- Start date
-
Hello Guest. Before you post check the Troubleshooting guide here, Dortania Troubleshooting
Have you set the bios to run macOS after the bios update?
Have you used the ResetNvramEntry.efi driver from the OpenCore boot screen?
Have you used the ResetNvramEntry.efi driver from the OpenCore boot screen?
You enabled 4G Dencoding?
BIOS Settings
- Enter BIOS -> Press Delete -> Enter Setup
- Exit -> Load Optimised Defaults
- Ai Tweaker -> Ai Overclock Tuner -> D.O.C.P.
- Advanced -> APM Configuration -> Power On By PCIe -> Disabled
- Advanced -> PCI Subsystem Settings -> Above 4G Decoding -> Enabled
- Advanced -> PCI Subsystem Settings -> Re-Size BAR Support -> Disabled
- Advanced -> USB Configuration -> Legacy USB Support -> Auto or Disabled
- Boot -> Boot Configuration -> Fast boot -> Disabled
- Boot -> CSM -> Launch CSM -> Disabled
- Boot -> Secure boot -> OS Type -> Windows UEFI mode
- Boot -> Secure boot -> Key Management -> Clear Secure Boot Keys
@mumin16,
Ok so I've had a look at your query today. I checked and found you previously had posted a working EFI of your setup here. > https://forum.amd-osx.com/threads/i-need-msi-pro-b650-p-and-7600x-efi.4024/post-26740
I assume you hadn't updated your EFI so it's causing you boot issues? Therefore I've gone ahead and updated it for you to latest OC 0.9.4 including kexts, and also added the latest AMD kernel patches. It should boot with the latest Ventura.
I've also done some tweaks to the EFI and checked the specs of your system. Here are some things I found:
1) Your ethernet card is based upon Realtek 8125 Ethernet and NOT Intel - so I've disabled the Intel I225-V kext and SSDT-I225V for you.
2) You mentioned before wifi & Bluetooth doesn't work. So I checked online and found it is because it has an AMD Wifi 6E card (Mediatek MT7921K rebranded). If you want working wifi & Bluetooth you'll need to swap it out for an Intel AX210. Don't get any Broadcom cards as their support is being phased out.
3) You mentioned before your USB 2.0 ports not working also. I believe I have the fix for them so I've added them also to your EFI (SSDT-XHC0-TO-XHC & SSDT-PTXH-TO-XHC2) - these are fixes for the USB ports for AMD based boards.
Ok so I've had a look at your query today. I checked and found you previously had posted a working EFI of your setup here. > https://forum.amd-osx.com/threads/i-need-msi-pro-b650-p-and-7600x-efi.4024/post-26740
I assume you hadn't updated your EFI so it's causing you boot issues? Therefore I've gone ahead and updated it for you to latest OC 0.9.4 including kexts, and also added the latest AMD kernel patches. It should boot with the latest Ventura.
I've also done some tweaks to the EFI and checked the specs of your system. Here are some things I found:
1) Your ethernet card is based upon Realtek 8125 Ethernet and NOT Intel - so I've disabled the Intel I225-V kext and SSDT-I225V for you.
2) You mentioned before wifi & Bluetooth doesn't work. So I checked online and found it is because it has an AMD Wifi 6E card (Mediatek MT7921K rebranded). If you want working wifi & Bluetooth you'll need to swap it out for an Intel AX210. Don't get any Broadcom cards as their support is being phased out.
3) You mentioned before your USB 2.0 ports not working also. I believe I have the fix for them so I've added them also to your EFI (SSDT-XHC0-TO-XHC & SSDT-PTXH-TO-XHC2) - these are fixes for the USB ports for AMD based boards.
Last edited:
Thanks mate. you are king! but not work, same screen. for me, last working bios 7D78v152 is in https://www.msi.com/Motherboard/PRO-B650-P-WIFI/support . later versions, AGESA ComboPI 1.0.0.7a is problem.