7800x3d and 5700 stuck on "AMDCPUSupport::start trying to init pci service..."

[alexye2625]

PC SPECS:
ASUS ROG STRIX B650E-F GAMING WIFI
AMD Ryzen 7 7800X3D
AMD Radeon RX 5700
Corsair Vengeance 32gb 6000mt
CT1000P510SSD8

The old text got too long, I made some changes and got some good decent progress!
It would be great for any answers or fixes because this is my 5th day working on hackintosh.

 

[alexye2625]

I checked my USB drive and there indeed was nothing on there except an efi, com.apple.recovery and some logs and Rufus icons for my usb

 

[Edhawk]

Ok, it is surprising how many people have a second EFI folder present that causes this macOS incompatibility issue.

Check that you aren’t using a specific system ID in the SecureBootModel entry in your config.plist, this needs to be set as ‘Disabled’ for an AMD hack.

 

[alexye2625]

Hey i tried again after a while and i got this

 

[Edhawk]

The errors show in the verbose text above relate to ACPI Patches that are incorrect but present in your config.plist, or missing entirely from your config. I am not at my desk so can’t open your EFI or more importantly the config.plist to check which it is.

 

[alexye2625]

When are you back at your desk to check?

 

[Edhawk]

Well that isn't the EFI folder that I provided, or even a close family member!

It contains a lot of unnecessary kexts, a couple of useless SSDT's and is missing the ACPI Patches that would fix those ACPI errors in the verbose text you added to post #23.

Try this EFI-v2 see if you can boot in to macOS with this setup.

This EFI is based on my Working B650E-F Gaming system that runs Sequoia 15.7.4 without issue.

I am still having issues getting Tahoe to install and run smoothly on this B650E-F Gaming system. So I would suggest you install Sequoia first and then see about getting Tahoe installed later.