Installing Tahoe26.5.2 on a TUF GAMING B650M-PLUS WIFI / AMD Ryzen™ 7 7700.

[ongcwele81]

I used the EFI provided by CaseySJ+ and customized it for my own machine.
I would like to thank CaseySJ+.


It has been three months since I set it up, and while the system is running, the Wi-Fi does not work—despite it being the "PLUS WIFI" model.


This is a difficult issue for me to resolve.

 

[Edhawk]

The Mediatek WiFi isn’t supported in macOS, so the builtin WiFi won’t work. This was the same for my ASUS B650E system.

You need to use a Broadcom or Intel WiFi/BT card in macOS if you need WiFi & Bluetooth working.

If you add either a Broadcom or Intel WiFi card you will need to disable the builtin WiFi & BT card in the bios, as macOS won’t function correctly with two WiFi/BT cards active and enabled.

 

[Astral420]

How are you able to get LAN working on Tahoe without any issues?

 

[Edhawk]

I use the builtin 2.5G Ethernet controller plus a Aquantia/Marvell AQC113C PCIe 10G Ethernet adapter on my Asus Prime B650E Ryzen 7 9700X system in Sequoia. But only the Aquantia AQC113C PCIe 10G adapter in Tahoe.

The Aquantia card is enabled by using @CaseySJ’s kernel patches and the Aquantia kernel Quirk in my config.plist. I use the Fenvi Aquantia 10G Ethernet card in all of my ATX & mATX Hacks. As it takes out the issues with the builtin Ethernet ports not working in Tahoe. I bought the cards from Aliexpress for around £40-£45 each. See the link below.

FENVI 10GBps AQC113 PCIE zu RJ45 Netzwerkkarte 1G/2.5G/5G/10Gbps 10000Mbps RJ45-Schnittstelle Gigabit Ethernet PCI-ELAN Adapter Win10 - AliExpress 7

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com