Stuck on OCB:LoadImage Fail : Unsupported

[Paradise]

Hi all, this is my first trial with hackintosh and OC but i have some difficulties

my configuration

MB: B550 Aorus Elite V2
CPU: Ryzen 3700x
GPU: RX550 Sapphire Pulse

i used OpenCore 0.7.0 and I followed the guide

somebody did have the same issue?

 

[Shaneee]

Check you've got the required UEFI Drivers in OpenCore, if you do enable JumpstartHotPlug in UEFI -> APFS in your config.

 

[Paradise]

Check you've got the required UEFI Drivers in OpenCore, if you do enable JumpstartHotPlug in UEFI -> APFS in your config.

what you mean with UEFI drivers? i have installed these ones

• HfsPlus.efi
• OpenRuntime.efi

but with JumpstartHotPlug disabled​

 

[Shaneee]

You should have at least OpenHfsPlus.efi and OpenRuntime.efi in your EFI Drivers folder. Check that setting I mentioned in the config though.

 

[Paradise]

Thanks, I will try this evening
I already have another NVME SSD with WIN10 already install (not the same NVME where I will install Catalina) , could this cause problems?
Should I remove it for the installation)

 

[Shaneee]

Shouldn't cause any issues being a different drive. You should be fine. Remove it if you've any worries.