[solved]OTA update to 12.3.1 not success

[Ts19971010]

when i want to update mac by OTA to 12.3.1,it had run all install program,but system still stay 12.1

mac sip enabled and securebootmodel is default



cpu:2700x

motherboard:asus tuf b550m plus wifi

by the way,the efi files i used is nearly perfect,except bt (ax200)


,,,,,

 

[clover84]

when i want to update mac by OTA to 12.3.1,it had run all install program,but system still stay 12.1

mac sip enabled and securebootmodel is default

View attachment 5619

cpu:2700x

motherboard:asus tuf b550m plus wifi

by the way,the efi files i used is nearly perfect,except bt (ax200)


,,,,,

Check your bios boot sequence / startup drive. During the update a special boot image is created, and your PC reboots a few times using this image. If you start the update from macOS and then reboot to your normal drive, the update will not install.

 

[Ts19971010]

Check your bios boot sequence / startup drive. During the update a special boot image is created, and your PC reboots a few times using this image. If you start the update from macOS and then reboot to your normal drive, the update will not install.

oh thanks it finally update to 12.3.1

may I continue to ask you about bt（ax200）on 12.3.1

in the China Forum, we discussed that the current system can not support the operation of Bluetooth

but i think ,maybe it's usbports problem，because ax200 nested on the motherboard, not external

 

[RyzeCooker]

Be sure to load the BlueToolFixup.kext

 

[Ts19971010]

Be sure to load the BlueToolFixup.kext

thanks,bt problem been solved,

it's the usbmap problem(before usb rebuild,i used bluetoolfixup.kext)

 

[RyzeCooker]

Good to hear!