SimpleBCM.kext - alternative to OCLP and root patching for Broadcom WiFi

[Edhawk]

Not sure if people are aware of the recent developments made by Laobamac regarding his simple BCM.kext. But this is something worth noting and using.

This single kext is a Lilu.kext plugin. It replaces the need to use the old Skywalk and IO80211FamilyLegacy kexts from Ventura, Block the current SkywalkFamily kext and run the OCLP root patches for Broadcom WiFi support in Sonoma, Sequoia and Tahoe. All without the need to create a snapshot and alter the macOS Volume.

Laobamac's GitHub repository (English translation) can be found here.

SimpleBCM/README.en.md at main · laobamac/SimpleBCM

Restore Broadcom Wi-Fi on macOS Tahoe with standalone OpenCore drivers - laobamac/SimpleBCM

github.com

The kext, config.plist excerpts and other inofmaiton can be found here.

Releases · laobamac/SimpleBCM

Restore Broadcom Wi-Fi on macOS Tahoe with standalone OpenCore drivers - Releases · laobamac/SimpleBCM

github.com

I would recommend using the Release 1.2.0 at this time, wait for the Alpha testing to be completed before using v1.2.1 on a working system. Unless you are feeling adventurous and want to help with the testing of the next release!

This is a really simple (hence the name) Broadcom fix for BCM4360 cards, including Fenvi T919 and native BCM4360CD chipsets.

After downloading the Release folder do the following:

1. Revert the OCLP (Mod/Plus) or RP-Core patches you are currently using.
2. Reboot.
3. Uninstall OCLP or RP-Core or any other variant of OCLP.
4. Mount your EFI.
5. Delete the SkywalkFamily.kext, IO80211FamilyLegacy.kext and it's plugin AirPortBrcmNIC.kext from your /EFI/OC/Kexts folder.
6. Delete the entries for the 3 x kexts from your config.plist.
7. Delete/disable the SkywalkFamily kext Block entry in your config.plist.
8. Add SimpleBCM.kext to the /EFI/OC/Kexts folder.
   1. Open the SimpleBCM-v1.2.0-RELEASE folder, drag and drop the BCMSimple.kext to the /EFI/OC/Kexts folder.
   2. Navigate to the SimpleBCM-v1.2.0-RELEASE folder and open config.fragment.plist, copy the kext entry and paste it in to your current config.plist.
9. If you are using AirportBrcmFixup.kext then you need to place/paste the entry for SimpleBCM.kext AFTER AirportBrcmFixup.kext. Get this wrong and you may have caused yourself unnecessary issues.
10. Save the changes to your config.plist
11. Reboot.

That is it.

When you boot the system your Broadcom WiFi should be working with all the native Apple Continuity/Handoff/Airdrop features.

Simples!

 

[leesurone]

Not sure if people are aware of the recent developments made by Laobamac regarding his simple BCM.kext. But this is something worth noting and using.

This single kext is a Lilu.kext plugin. It replaces the need to use the old Skywalk and IO80211FamilyLegacy kexts from Ventura, Block the current SkywalkFamily kext and run the OCLP root patches for Broadcom WiFi support in Sonoma, Sequoia and Tahoe. All without the need to create a snapshot and alter the macOS Volume.

Laobamac's GitHub repository (English translation) can be found here.

SimpleBCM/README.en.md at main · laobamac/SimpleBCM

Restore Broadcom Wi-Fi on macOS Tahoe with standalone OpenCore drivers - laobamac/SimpleBCM

github.com

The kext, config.plist excerpts and other inofmaiton can be found here.

Releases · laobamac/SimpleBCM

Restore Broadcom Wi-Fi on macOS Tahoe with standalone OpenCore drivers - Releases · laobamac/SimpleBCM

github.com

I would recommend using the Release 1.2.0 at this time, wait for the Alpha testing to be completed before using v1.2.1 on a working system. Unless you are feeling adventurous and want to help with the testing of the next release!

This is a really simple (hence the name) Broadcom fix for BCM4360 cards, including Fenvi T919 and native BCM4360CD chipsets.

After downloading the Release folder do the following:

1. Revert the OCLP (Mod/Plus) or RP-Core patches you are currently using.
2. Reboot.
3. Uninstall OCLP or RP-Core or any other variant of OCLP.
4. Mount your EFI.
5. Delete the SkywalkFamily.kext, IO80211FamilyLegacy.kext and it's plugin AirPortBrcmNIC.kext from your /EFI/OC/Kexts folder.
6. Delete the entries for the 3 x kexts from your config.plist.
7. Delete/disable the SkywalkFamily kext Block entry in your config.plist.
8. Add SimpleBCM.kext to the /EFI/OC/Kexts folder.
   1. Open the SimpleBCM-v1.2.0-RELEASE folder, drag and drop the BCMSimple.kext to the /EFI/OC/Kexts folder.
   2. Navigate to the SimpleBCM-v1.2.0-RELEASE folder and open config.fragment.plist, copy the kext entry and paste it in to your current config.plist.
9. If you are using AirportBrcmFixup.kext then you need to place/paste the entry for SimpleBCM.kext AFTER AirportBrcmFixup.kext. Get this wrong and you may have caused yourself unnecessary issues.
10. Save the changes to your config.plist
11. Reboot.

That is it.

When you boot the system your Broadcom WiFi should be working with all the native Apple Continuity/Handoff/Airdrop features.

Simples!

Nice post, I've been testing this out on an MSI X870E Carbon Wifi board, swapped the internal M2 card out for a good old BCM94360NG card. Sequoia works as expected but with Tahoe and a spoofed RX 6950XT the end result is a black screen. The system boots fine, sleeps and wakes but no display. I swapped in an RX 580 video card, same result. I think I saw @fabiosun had a similar issue over at Insanelymac on his Asus X870E Crossfire Hero system.
Have you had better success with Tahoe and one of your AM5 boards yet?

 

[fabiosun]

I think I saw @fabiosun had a similar issue over at Insanelymac on his Asus X870E Crossfire Hero system.

Hi leusurone
i did many try in a different direction
It is possible to use SimpleBCM 1.0 using the blocks and old IOSkywalk kext (without root patches)
It is also possible to use SimpleBCM 1.2 using Thaoe integrated Ioskywalk, but in my case only using -v as boot arg
It is very weird but here in this way it is working
Without -v bootarg i have black screen
I am helping laobamac to investigate this weird situation, for now no success to understand what happens

 

[leesurone]

Hi leusurone
i did many try in a different direction
It is possible to use SimpleBCM 1.0 using the blocks and old IOSkywalk kext (without root patches)
It is also possible to use SimpleBCM 1.2 using Thaoe integrated Ioskywalk, but in my case only using -v as boot arg
It is very weird but here in this way it is working
Without -v bootarg i have black screen
I am helping laobamac to investigate this weird situation, for now no success to understand what happens

Thanks as always, I'm going to see if I can replicate your results.

 

[leesurone]

Hi leusurone
i did many try in a different direction
It is possible to use SimpleBCM 1.0 using the blocks and old IOSkywalk kext (without root patches)
It is also possible to use SimpleBCM 1.2 using Thaoe integrated Ioskywalk, but in my case only using -v as boot arg
It is very weird but here in this way it is working
Without -v bootarg i have black screen
I am helping laobamac to investigate this weird situation, for now no success to understand what happens

Happy to report that worked with the RX 580 card, I'm pretty confident the RX 6950XT will work as well, at least for the time being.

 

[Edhawk]

Both my AM5 systems work just fine with SimpleBCM.kext 1.2.0. Even my B550 systems work with this kext, when they wouldn’t with OCLP or any of its variants.

I have swapped all the systems in my signature, and I am working my way through some Intel systems, to using SimpleBCM.kext and SimpleHDA.kext with no issues.

I now have no reason to dual-boot Sequoia and Tahoe, as I have the full Apple Continuity and audio features in Tahoe that I had in Ventura.

 

[Edhawk]

Did you revert the OCLP Root Patches before uninstalling OCLP?

Do you have the Network stack being implemented twice?

 

[leesurone]

Did you revert the OCLP Root Patches before uninstalling OCLP?

Do you have the Network stack being implemented twice?

I never installed OCLP on this system, its a new build. The EFI I'm using is clean so it was a mystery. Changing the boot arguments to just -v solved it.

 

[fabiosun]

@leesurone this build solved the problem

Release v1.2.1-alpha · laobamac/SimpleBCM

Universal native Skywalk development build for macOS Sonoma, Sequoia and Tahoe. Keep native IOSkywalkFamily and IO80211Family enabled; remove old Skywalk Block/Exclude rules. Installation: README. ...

github.com

with this bootarg:
sbcmdelay=10000