I'm trying to use Monterey 12.5 with Opencore 0.8.3.
I followed by Dortania's Opencore Install Guide and everything was fine until installing monterey.
after monterey installed, when start setup, computer suddenly shutdown and reboot.
So I installed Big Sur and tested. Big Sur didn't have any problem.
First I thought its about USB problem so I mapped USB and add kext.
but it did't fix the problem so I followed "Fixing Shutdown/Restart" page on dortania guide.
it also didn't fix the problem. so I can't guess what is problem.
Do you guys have any idea why this happened and how to fix?
- Hardware Spec
CPU: AMD Ryzen 3700X
MB: Aorus Elite X570
GPU: Sapphire Nitro+ RX 5700XT
RAM: Samsung DDR4-2666 16G * 2
SSD: Samsung 970 EVO M.2 NVMe 500G * 2
- BIOS
Disabled: CSM, SVM, SecureBoot, IOMMU
Enabled: Above 4G Decoding, EHCI/XHCI Hand-off
- EFI
(I remove SMBIOS Serials)
I followed by Dortania's Opencore Install Guide and everything was fine until installing monterey.
after monterey installed, when start setup, computer suddenly shutdown and reboot.
So I installed Big Sur and tested. Big Sur didn't have any problem.
First I thought its about USB problem so I mapped USB and add kext.
but it did't fix the problem so I followed "Fixing Shutdown/Restart" page on dortania guide.
it also didn't fix the problem. so I can't guess what is problem.
Do you guys have any idea why this happened and how to fix?
- Hardware Spec
CPU: AMD Ryzen 3700X
MB: Aorus Elite X570
GPU: Sapphire Nitro+ RX 5700XT
RAM: Samsung DDR4-2666 16G * 2
SSD: Samsung 970 EVO M.2 NVMe 500G * 2
- BIOS
Disabled: CSM, SVM, SecureBoot, IOMMU
Enabled: Above 4G Decoding, EHCI/XHCI Hand-off
- EFI
(I remove SMBIOS Serials)