Lenovo Legion 5 15ach6h 5800H RTX 3060 Sequoia 15.3.1 - problem

[elqady4]

Hello, I would like to present a problem I encountered while trying to install macOS (Hackintosh) on my Lenovo Legion 5 15ach6h laptop. The device is equipped with an AMD Ryzen 7 5800H processor and an NVIDIA GeForce RTX 3060 GPU. The issue I’m currently facing is that the system gets stuck at a black screen after executing the installation commands, and the usual options such as Disk Utility or macOS Recovery do not appear.


I will provide all the necessary technical details to help you fully understand the problem, and I kindly request your assistance in finding a solution.

---

Steps Taken So Far​

1. Preparing the Installation File:
   
   • I used the Sequoia 15.3.1.raw file, which I downloaded from the following link:
     
     
     https://www.mediafire.com/file/eh533i3oqyupfdb/Olarila+Sequoia+15.3.1.raw/file
     
     
   • I flashed this file onto a USB drive using BalenaEtcher .
     
     
2. Setting Up the EFI Folder:
   
   • I attached my full EFI folder, which contains all the necessary modifications to support my hardware.
   • I also attempted to install Sequoia 15 using OpenCore with the following command:
     
     python3 ./macrecovery.py -b Mac-937A206F2EE63C01 -m 00000000000000000 download
     
     
     
3. Executing the Installation Process:
   
   • After preparing the USB drive and EFI folder, I entered the BIOS and enabled UEFI Boot while disabling Secure Boot .
   • Upon booting the system with the USB drive, a black terminal-like screen appeared where I executed the necessary commands to start the installation process.
   • The problem began after the commands finished executing, as the system got stuck on a black screen. It was expected that the options for Disk Utility , macOS Installer , and others would appear, but they did not.

---

Detailed Description of the Problem​

• The Black Screen: After the commands were executed, the system remains stuck on a black screen without any error messages or available options.
• Missing Expected Options: The menu containing Disk Utility , macOS Installer , and other options does not appear at all.
• Previous Attempts to Solve the Problem:
  • I verified the integrity of the installation file and confirmed it was correctly flashed onto the USB drive.
  • I updated the EFI folder multiple times to ensure compatibility with my hardware.
  • I tried different versions of OpenCore, but the issue persisted.

---

Additional Technical Information​

• Current Operating System: Windows 11
• Processor: AMD Ryzen 7 5800H
• Graphics Card: NVIDIA GeForce RTX 3060
• RAM: 16GB
• Storage: 512GB NVMe SSD
• Target macOS Version: Sequoia 15.3.1

 

[vdt161]

I have the same configuration, have you been able to log in successfully? Can you give me the efi version?

 

[Guantanamera]

Hello, I tried the OC you attached and it worked for my Lenovo Ryzen 7 5800H. 1 I used the OC I am attaching, then switched to the OC you shared and it worked fine. Then I patched it so that Airport itwlm would be recognized. I'll let you know if it worked for you.

 

[Guantanamera]

ultimamente sequoia