hi i have panic hp 805 g6 rayzen 4650g 6 core 12 thrd

[jdndkdndj]

can any one help me with this pc this my ufi i have restart loop
I'm trying to install macOS on my HP EliteDesk 805 G6 (AMD Ryzen) using OpenCore 1.0.6. I've successfully completed the first stage of installation, but I'm facing two main issues:

1. Restart Loop: After the first phase of installation, the system fails to reboot automatically and hangs at SystemHalt took 0 ms or apfs_vfsop_unmount and requires a hard reset.
2. Stuck at EXITBS:START: When trying to boot into the second stage (macOS Installer from the disk), the system stucks at [EB|LOG:EXITBS:START].

What I've tried:

• Setting RebuildAppleMemoryMap to True.
• Setting SetupVirtualMap to False.
• Setting SyncRuntimePermissions to True.
• Verified that SecureBootModel is Disabled.
• Used AMD Kernel Patches for my CPU.

Attached: Screenshot of the verbose log and my config.plist (optional to attach).Any help would be appreciated!

 

[Edhawk]

The contents of your /EFI/OC/ACPI folder and the SSDT's listed in your config.plist don't match. 2 x SSDT's are listed in the config but not present in the ACPI folder.

You shouldn't be using any DeviceProperties when using NootedRed.kext.

Have a look at the EFI folder in post # 7 of this success story for a HP EliteDesk 705 G5 mini system. It shouldn't be far off what yours should be, given they are very similar systems.

Post in thread 'HP EliteDesk 705 G5 Desktop Mini - Sequoia and Tahoe'

Thursday at 11:54 PM

Here is a copy of the EFI folder I am currently using to run macOS Tahoe 26.3.2 (updated this evening).

It should also work with Ventura, Sonoma and Sequoia, as I have had all four OS's installed on this system.

I don't have a working WiFi/BT card in this system at the moment, so it lacks any and all WiFi & BT kexts and settings. Other than that everything works as expected.

• Edhawk

The EFI in the post linked above has allowed me to install and run Ventura, Sonoma, Sequoia and Tahoe on the EliteDesk 705 G5. This was set to work with an Intel WiFi/BT card, so may contain a few kexts & config entries you don't need, if you don't have a similar WiFi/BT card installed.

 

[jdndkdndj]

The contents of your /EFI/OC/ACPI folder and the SSDT's listed in your config.plist don't match. 2 x SSDT's are listed in the config but not present in the ACPI folder.

You shouldn't be using any DeviceProperties when using NootedRed.kext.

Have a look at the EFI folder in post # 7 of this success story for a HP EliteDesk 705 G5 mini system. It shouldn't be far off what yours should be, given they are very similar systems.

Post in thread 'HP EliteDesk 705 G5 Desktop Mini - Sequoia and Tahoe'

Thursday at 11:54 PM

Here is a copy of the EFI folder I am currently using to run macOS Tahoe 26.3.2 (updated this evening).

It should also work with Ventura, Sonoma and Sequoia, as I have had all four OS's installed on this system.

I don't have a working WiFi/BT card in this system at the moment, so it lacks any and all WiFi & BT kexts and settings. Other than that everything works as expected.

• Edhawk

The EFI in the post linked above has allowed me to install and run Ventura, Sonoma, Sequoia and Tahoe on the EliteDesk 705 G5. This was set to work with an Intel WiFi/BT card, so may contain a few kexts & config entries you don't need, if you don't have a similar WiFi/BT card installed.

Thank you so much, Edhawk! Your EFI worked like a charm and the system is up and running. However, I’m facing a complete lack of internet connectivity. My Ethernet port (Realtek 8111) doesn't even light up, and I’m currently forced to use USB tethering from my phone to get online. I’ve checked the settings and kexts, but no luck so far. Any advice or specific BIOS/OpenCore tweaks you’d recommend for this? Thanks again for your amazing contribution