FX6300 Nvidia GT 710 - Catalina - Opencore - Budget system

[Deleted member 156]

Hardware Specs:
Motherboard: GA-78LMT-USB3 Rev 5.0
CPU: FX-6300 (3.6Ghz bios settings)
SSD: PNY 120GB (Sata type AHCI in bios)
Graphics: Asus Nvidia GT 710 2GB
Memory: 8GB Crucial DDR3 1600
Bluetooth: Kensington USB
Monitor: 27" HD

Software Specs:
OS: Catalina 10.15.5 (No dual boot)
Bootloader: Opencore 0.5.8
Kexts: Lilu, WhateverGreen, VirtualSMC, AppleMCEReporterDisabler, NullEthernet, RealtekRTL8111, XLNCUSBFix, VoodooHDA, GenericUSBXHCI
APCI: ssdt-rmne.aml
Drivers: VBoxHfs, Openruntime
SMBIOS: iMacPro1,1

Working:
Stable and no issues
Internet, USB 3.0 at full speeds, USB 2.0 at 12 Mbps
Imessage, Icloud, Bluetooth
Analog and HDMI audio (VoodooHDA)
HDMI/DVI Graphics acceleration
Sleep, Shutdown, Safari Youtube, Apple TV+ (shikigva=256)

Not working:
Webcam - Mac detects, led lights come on but no video
Restart - System shuts down but won’t restart fan keeps running
USB Opencore boot - Tried legacy and uefi

 

[rickgrames]

Hola! podrias ayudarme? tengo el mismo mother con el procesador fx 4100 pero no me inicia desde el usb

 

[maclinux1960]

H

Hardware Specs:
Motherboard: GA-78LMT-USB3 Rev 5.0
CPU: FX-6300 (3.6Ghz bios settings)
SSD: PNY 120GB (Sata type AHCI in bios)
Graphics: Asus Nvidia GT 710 2GB
Memory: 8GB Crucial DDR3 1600
Bluetooth: Kensington USB
Monitor: 27" HD

Software Specs:
OS: Catalina 10.15.5 (No dual boot)
Bootloader: Opencore 0.5.8
Kexts: Lilu, WhateverGreen, VirtualSMC, AppleMCEReporterDisabler, NullEthernet, RealtekRTL8111, XLNCUSBFix, VoodooHDA, GenericUSBXHCI
APCI: ssdt-rmne.aml
Drivers: VBoxHfs, Openruntime
SMBIOS: iMacPro1,1

Working:
Stable and no issues
Internet, USB 3.0 at full speeds, USB 2.0 at 12 Mbps
Imessage, Icloud, Bluetooth
Analog and HDMI audio (VoodooHDA)
HDMI/DVI Graphics acceleration
Sleep, Shutdown, Safari Youtube, Apple TV+ (shikigva=256)

Not working:
Webcam - Mac detects, led lights come on but no video
Restart - System shuts down but won’t restart fan keeps running
USB Opencore boot - Tried legacy and uefi

Hello sam298,

can you share your config.plist and your ssdt-rmne.aml that you use?
I have the same CPU and GPU, but with my Mobo I have not the full USB Speed
for USB 3.0 and USB 2.0.

Greetings from Germany, maclinux1960

 

[Deleted member 156]

H


Hello sam298,

can you share your config.plist and your ssdt-rmne.aml that you use?
I have the same CPU and GPU, but with my Mobo I have not the full USB Speed
for USB 3.0 and USB 2.0.

Greetings from Germany, maclinux1960

My plist (clover and opencore) are posted here
To get usb 3.0 speeds via usb 3.0 ports, you need only xlncusbfix kext.
To get usb 2.0 speeds via usb 3.0 ports using usb 2.0 drives, you can use a usb 3.0 hub or use genericusbxhci.kext

ssdt-rmne.aml is needed only for imessage fix only. You can read and get the aml from here

 

[Deleted member 156]

Hola! podrias ayudarme? tengo el mismo mother con el procesador fx 4100 pero no me inicia desde el usb

Follow the amd guide. I am not sure what the issue is. You have to use usb 2.0 port initially for the usb installer and when it boots, if you see ++++, swap the usb drive to an usb 3.0 port

 

[maclinux1960]

Hello sam298,

thankyou for writing me where and how I can go the same way to fix my Problems.
When I'm done, I will give a short Report what worked and what not.

Regards, maclinux1960

 

[rickgrames]

[QUOTE = "sam298, publicación: 3211, miembro: 156"]
Sigue la guía de amd. No estoy seguro de cuál es el problema. Debe usar el puerto usb 2.0 inicialmente para el instalador usb y cuando se inicia, si ve ++++, cambie la unidad usb a un puerto usb 3.0
[/CITAR]
Hgracias por responder. He probado todos los puertos y nada. Lo que he hecho es seguir la guia para sistemas heredados con duet.pkg, pero estoy confundido. Instalo duetpkg en my usb pero no comprendo como instalar luego macOs. Se agradece todoa ayuda.