Error "[EB|#LOG:EXITBS:START]" Cannot Install

[blueprintfactory]

I am doing the installation without any problem, but after installation, I have a black screen. I installed the debug version to see the cause of the error. My debug log is here. I checked the solutions for this error on the Dortania site, but it didn't work. I uploaded my config file to the topic. The patch file I use.
My EFI Files:



My System:
Case: Xigmatek Venom X | MBO: Asus TUF B450-PRO GAMING
| CPU: AMD Ryzen™ 5 3600X , @ 4.4GHz | CPU Cooler: Stock | RAM: Crucial 16GB (2x8GB) Ballistix Sport LT Gray DDR4 @ 3000MHz | GPU: ASUS RADEON™ RX 5700XT 8GB GDDR6 @ 1905 MHz 256-bit | PSU: XIGMATEK X-POWER 650W 80+ | SSD: Kingston 480GB HyperX Fury 3D | M.2 SSD : 1 WD 240GB Sata Green M.2 SSD | Display: AOC Q3279VWFD8 |

 

[dzigg]

Probably you've tried this, but if you haven't,try to set SetupVirtualMap to false in config.plist.
I had this problem, although in Catalina.

 

[SimaSmile]

Thanks for blueprintfactory`s config.list.

 

[RyzeCooker]

I don't see the Kernel Quirk ProvideCurrentCpuInfo enabled (True) or even present. Did you follow these instructions? Any boot will hang at exactly this point unless it is enabled and the core count is correctly provided. I manage to b0rk the procedure myself on first try.

 

[Shaneee]

I don't see the Kernel Quirk ProvideCurrentCpuInfo enabled (True) or even present. Did you follow these instructions? Any boot will hang at exactly this point unless it is enabled and the core count is correctly provided. I manage to b0rk the procedure myself on first try.

The original post was made before the changes to the patches and so will the config. Most likely just not updated for latest Big Sur.

Download fresh patches and merge then and update config to relate.

 

[RyzeCooker]

Ha, you're right. I must check dates more often. It looked like a new post at first glance.