[ASUS M3401QC Laptop - AMD] OpenCore - HowTo

[stezza88]

Laptop's Motherboard : Asus VivoBook Pro 14 OLED M3401QC
CPU : HexaCore AMD Ryzen 5 5600H, 3273 MHz Rev. 00A50F00h
Integrated graphics : AMD Radeon Graphics Cezanne (Integrated 1002 / 1638, Rev C6)
Dedicated GPU : NVIDIA GeForce RTX 3050 Laptop GPU
Bios : AMI M3401QC.305

Fnal working configuration (with still some problems)

Resuming :

• Trackpad is still not working but keyboard works.
• Screen turning off and on doesn't works during the installer. (black screen issue)
• Audio not setupped.
• HDR not working (screen flickering if HDR enabled)

 

[leesurone]

How this can be accomplished? Can i have a little bit more detailed spiegation?

Adding The Base OpenCore Files | OpenCore Install Guide

 

[stezza88]

I've buyed a "Wi-fi 6E AX210" https://www.amazon.it/gp/product/B0B39631G1/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 and i will follow this guide "https://www.tonymacx86.com/threads/how-to-wi-fi-6-intel-ax210-on-macos-sonoma.327834/"

It's working fine!!

 

[Shaneee]

Test with this for trackpad.

 

[leesurone]

But.. new problem also.. when screen been turning off by energy saver in the installation, pc won't restart.. so sick

So resuming :

• Trackpad is still not working but keyboard works.
• Installation sometimes boot and sometimes not. (my pendrive is accomplished by two folders : a "com.apple.recovery.boot" folder where are placed .dmg files and an "EFI" folder)
• Screen turning off and on doesn't works during the installer. (black screen and then i must turn off the pc to restart)
• I'm not thinking about the audio.. i will try some kexts later... for first i want to see a complete install with these confs how it works.
• HDR not working (screen flickering if enabled)

• Screen turning off and on doesn't works during the installer. (black screen and then i must turn off the pc to restart)

Most likely your USB Ports are not mapped correctly.

 

[stezza88]

• Screen turning off and on doesn't works during the installer. (black screen and then i must turn off the pc to restart)

Most likely your USB Ports are not mapped correctly.

I think it's more related about the GPU card or screen wich is evalueted like "unknown display" ... when display goes in standby

 

[leesurone]

I think it's more related about the GPU card or screen wich is evalueted like "unknown display" ... when display goes in standby

I think it's more related about the GPU card or screen wich is evalueted like "unknown display" ... when display goes in standby

What you are describing happens on desktops too, the computer doesn't power back up correctly after sleep and will either lock up, reboot or not come out of sleep. Very, very, very common.

 

[stezza88]

test