small development... i resigned myself to being a windows user for while and things kept crashing. turns out one of my two g.skill ddr4 sticks is bad and im working on an rma. so i pulled the bad module and have been running on just 16gb for a day or two. might give the 0.8.3 monterey install a...
i'm not using the usb map i did and revised from before. i'm just using the USBToolbox.kext and UTBDefault.kext. its as if no mapping has taken place.
im using the Fenvi T919 card and the USB bluetooth module thats on it. as far as i can tell the wifi card works fine from the installer when...
just usbtoolbox and the utbdefault kexts like the usbtoolbox guide instructed. -> https://github.com/USBToolBox/kext
now that i have the windows nvme put back in i have access to Win10 and can try to USBmap again.
yeah the last two days worth of attempts were done with only the target NVMe for macOS installed (i had only just re-installed the windows drive this evening before sending those screenshots and pics).
i was using usb 3.0 ports the whole time tho. i guess when everyone goes to bed i'll try...
all assumptions are correct
real mac to download and restore the installer, macbook pro 2015 running 12.5.1 (updated last night!)
using a usb 64 gig datastick pro (usb 3.0). have also used 16gb PNY usb 2.0 drives to same effect
yep 64 and 16
USB gets formatted as MyVolume in Mac os extended...
same error using a gibMacOs pulled image.
getting desperate i tried moving the NVMe i'm using to the other m.2 slot. same result tho now the installer says my 500gb disk is an external.
downloaded the monterey installer using the app store (not installinstall) on my macbook pro, setup the stick and tried again.
this one got further! got past the 12 minute mark and then gracefully rebooted, booted back into an installer and then it started a macOS Update Assistant and that's...
downloaded another monterey image (12.4-21f79), created the usb stick, used the same EFI. and i get the same error when trying to install. the previous monterey image i tried was 12.5-21g72.
if this is a bad download then its happened to every one of my attempted downloads for the past several...
started from scratch, reverted mobo BIOS to a pretty old F11 version, and built a whole new 0.8.3 opencore EFI going by the guide again step-by-step. propertree oc snapshot is not putting kexts into the correct order so i had to manually put things like lilu and virtualsmc first cuz it wasn't...
opened the machine up and pulled all non-essentials out (wifi, any extra usb devices, second nvme that has windows) and still won't go. tried with above 4g on and off with the npci=0x2000 argument that i've used in the past. still halts at the same place. tried latest BIOS (F37g), reset to...
latest EFI folder yields the same results. boot from stick, eventually gives me GUI picker. tried the already installed macOS, gives that same screen shot as i posted before. also tried booting into the Big Sur installer but get the same thing. the Recover DMG does load tho and im currently...
well the first thread was for the ailing 0.7.1 post-install issues and this one is for building a whole new 0.8.3 pre-install because the old one got all messed up. i agree two threads for the same issue is bad but since they are technically not the same issue... cisco TAC would say i needed...
i've only ever used the pre-made ones but let's see if i can figure this out now.
i think i did that right...
1) "acpidump.exe -b -n DSDT -z" gets me DSDT.dat
2) "iasl.exe DSDT.dat" gets me DSDT.dsl
3) "iasl.exe DSDT.dsl" gets me DSDT.asl
okay, loaded your EFI onto a new drive, rebooted, above 4g is enabled, booted from usb, eventually GUI picker came up, i choose my macOS install and i am stuck here:
i will setup another 16gb stick i have and try it. that's the weird thing about my already installed 0.7.1 was i didn't touch it after doing the changes you recommended and it worked fine for a few days (same issues i had before but it booted at least). i always backup and store EFI on my NAS...
new thread for new install issues. i had an 0.7.1 install that just stopped working today so i'm trying to build a new USB with 0.8.3. i can get into windows and have run a USB map but not sure if i've done that right. attached is my EFI as well as the last error log i got. system boots, i pick...
i don't know what happend but my 0.7.1 build on the nvme won't start up any longer. i get repeating errors over and over again (didn't grab an image yet). i can still get into windows and have my macbook pro tho so im not stranded.
so now trying to get an 0.8.3 config working on a usb stick. i...
USB mapping in windows 10 reveals the following. i hope i did this right...
AMD USB 3.10 eXtensible Host Controller - 1.10 (Microsoft) | USB 3.0 (XHCI) | 8 ports
Port 1 | USB 2.0 | USB 3 Type A rear E (same as port 5) in 2.0 mode (letters assigned to ports are based on the manual)...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.