Search results

It should be similar to this but your wifi/ bluetooth module won't work, it's not supported. https://forum.amd-osx.com/threads/genmachine-ren5000.4843/

Not a problem with your EFI, your USB Boot drive is not set up correctly. The only one who can fix that is you.....I would search YouTube for guides how to create the installer media in Windows since the Dortania guide isn't doing it for you. There quite a few of them out there.

Easy enough to add serial numbers, SYMBIOSIS is set to MacPro 7,1

As long as OpenCore kept loading, no it’s normal.

Well I'd have to guess you didn't follow the instructions properly, I've never done this myself so I can't really help except to suggest to start over and take your time reading the instructions.

My suggestion is that before you delve into another project sort out Ethernet first. The card you linked is an intel based card and should work with the correct kexts but will not give you airdrop. You would need a Fenvi T919 Pcie card for that along with OpenCore Legacy Patcher app which...

Those instructions apply only if you have access to a working Mac. Its a little more complicated in Windows but instructions for dong that are located here: https://dortania.github.io/OpenCore-Install-Guide/installer-guide/windows-install.html

From the post above Try remaking your macOS Installation drive/app, as it could be your installer is borked. Erase the current macOS Installation drive. Delete the macOS installation app you previously downloaded. Download a new copy of the Sonoma installation app. Format your USB pen drive as...

Your USB drive is not set up correctly, if done right at boot it will show an icon of the version of macOS you are installing and say InstallSonoma or some such label.

I'm not exactly sure what you mean. Maybe post a photo of what you see? I am guessing you haven't built the USB install drive correctly but from the information provided its impossible to tell. Stolen from Edhawk Try remaking your macOS Installation drive/app, as it could be your installer is...

Check this out in success stories, same board. I updated his EFI so it should load Sonoma, changed the CPU score counts to 8 too. https://forum.amd-osx.com/threads/update-gigabyte-x670-gaming-x-ax-ryzen-9-7950x-rx-6800-xt-dual-boot-macos-ventura-13-1-windows-11.4041/

The config.plist only tells half the story. Please zip and upload your entire EFI folder for help.

So I noticed a couple of things, you were loading UTBDefault.kext along with UTBMap.kext. UTBDefault.kext really does nothing so I disabled it in the attached, it could have been a source of conflict with your UTBMap.kext and cause problems. The other issue, which likley explains your ethernet...

Wow, I never realized, even after all this time, that each of the four patches was macOS version specific. I see it now that you explained it.....that is awesome to know and it completely makes sense.(y)

That's odd that even works, you only have one Kernel Patch identifying your CPU Cores, there should be four....

One more try, all bluetooth and wireless kexts disabled, E=1000 removed fro boot arguments.

See if this helps

Then you are lucky because your USB Map is not even close, every port is set to internal. No USB2, USB3, USBC.....the only one that should be set internal that is showing is your bluetooth controller. If you have USB enabled sound, LED functions on your board or use internal headers for anything...

Its supposed to be a DWord value, I always use 32 bit but 64 bit might work. Definitely do not use Q Word. https://www.tonymacx86.com/threads/fix-incorrect-time-in-windows-osx-dual-boot.133719/ There are too many reasons you lose internet after sleep that I don't know I can help unless you zip...

It's highly unlikely a bios version change will make a difference. I notice you have the XHCIPortLimit quirk enabled which is fine but is not a real solution to USB Port mapping and is likely the reason you system will not sleep/ wake correctly. I would either use USBToolBox in Windows or...