Search results

We can bridge those pins using a female/female Dupont or breadboard cable such as the one that comes in this packet: https://www.amazon.com/EDGELEC-Breadboard-1pin-1pin-Connector-Multicolored/dp/B07GD312VG The USB connector is needed only if you wish to connect a USB 2.0 device to one of the...

Hello @agent2 I posted this Sonoma mini-guide last week. OpenCore 0.9.4 is the minimum version necessary (it fixes ForceAquantiaEthernet quirk for 10GbE). https://www.tonymacx86.com/threads/asus-z690-proart-creator-wifi-thunderbolt-4-i7-12700k-amd-rx-6800-xt.318311/post-2380825

No worries! :) Please try the attached EFI folder as follows: Rename top level folder to EFI Add serial numbers in PlatformInfo -> DataHub This is my current EFI folder with a number of junk items removed. I've tested this successfully on my own system.

Fortunately we have the same motherboard so I'll try booting my Asus X670E Gene using your EFI folder. Will reply back later in the day.

Attached is the updated config.plist. Please add serial numbers to PlatformInfo -> DataHub before using. Let's see if this file makes a difference.

I can update the config.plist on Wednesday. Currently on a business trip. Please remind me if you don’t get a reply here by end of Wednesday.

Please try using the latest AMD-OSX kernel patches first. If you would like me to update your config.plist just let me know.

Some questions and comments: Which version of macOS are you running? Was OpenCore 0.9.1 working? If so, do you still have a copy of it? The kernel quirk DisableIoMapperMapping is not needed on AMD platforms. It's okay to enable the checkbox as you've done, but it won't make any difference. It...

Hello @Pabo, Two things to change (first one is most important):

Looks perfect... Does hot plug work?

Please try the attached SSDT. We also need to include SSDT-DTPG.aml (also attached). After adding both SSDTs, reboot the system and post IOReg file once again so I can verify the outcome.

Please run IORegistryExplorer and post the IOReg file (File -> Save As...). I can modify the Thunderbolt SSDT based on that.

Hello @rexxver, Have you bridged the top and middle pins of the vertical 5-pin J1 header? That will power up the card. We also need a Thunderbolt SSDT, which we can grab from https://hackindrom.zapto.org

Unfortunately that card won’t work. We tried unsuccessfully to flash its firmware. The only card worth getting is the GC-Titan Ridge from Gigabyte.

Yes that is the right card. They are getting harder to find now.

Yes those ports are usable, but Thunderbolt devices must be connected to the system prior to boot because hot plug does not work.

Please try this version of SSDT-USBW.aml, which looks like this:

Not. Going. To. Happen. :) :) A substantial network and home A/V upgrade project is ongoing, which has created a (temporary) mess and holes in various walls. Once that is done I just may post a desk picture... https://www.tonymacx86.com/threads/truenas-and-other-custom-nas-builds.325783/page-8

Your best option is a GC-Titan Ridge from Gigabyte. This card is also easy to flash if necessary. GC-Titan Ridge cards are getting difficult to find so if you have Thunderbolt 1 and Thunderbolt 2 devices that cannot be replaced with Thunderbolt 3/4 versions, then a GC-Titan Ridge may be the...

For the Intel version of the board (Asus Z690 ProArt Creator), Asus provided a special BIOS 9901 that rolls Thunderbolt back to NVM31. I don't know if Asus will create a similar version for Asus X670E ProArt Creator...