Search results

Here is my last EFI folder I had problem with OCLP 2.1.2 after last changes cause now it sees 2 GPUs and wants to patch even disabled NVIDIA. I got over it and now I have everything like I need. Only thing left is shutdown but I think that problem has to do with MOBO.

Let me say, I was the reason again. My gpu spoof was wrong. Thanks to CorpGhost from Discord, now it's all setup ok. He fixed my gpu spoof and told me to delete WhateverGreen.kext and now sound and gpu are working.

I finally found out what broke my audio from working. It was GPU. I removed gpu spoof and now my audio works again, but not gpu. Through Hackintool I see: GPU device path "PciRoot(0x0)/Pci(0x1,0x2)/Pci(0x0,0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)" GPU audio device path...

Update OpenCore 1.0.3 - fine OpenCanopy - boot image and icons work fine Still problems: no audio no shutdown after sleep fans spin like crazy synology drive client - reconnects only when deactivate and activate network card (Ethernet)

I have similar problem, on my desktop pc, sleep works, but after waking up fans spin like crazy. Have to reboot in order to stop them spinning

I have working setup. Everything is ok, except internal sound stopped working. It worked with AppleALC.kext 1.9.3, then I went for Fenvi T919 to work and now audio doesn't work any more. For Fenvi I used OCLP 2.1.2 with help of @Edhawk in this post: Edhawk tips Rest is in my signature, EFI in...

Finally I got Gpu to work. PCI path was not correctly put in config.plist. Now GPU is ok, and monitor is shown proprely

Update, sound is working with AppleALC 1.9.3 layout id 12. Fenvi T919 wifi and bluetooth working with OpenCore legacy patcher Still problem with RX 550

How you downloaded appleALC 1.9.3, there is only 1.9.2 under releases?

Just for the record, the problem was again me messing up installation. I didn't partition corectly ssd first time. I reinstanlled, now my ssd with mac os is bootable. I have RX 550 (LEXA PRO), but can't get HW support. I spoofed it, and put it into config but it doesn't get recognized. Anyone...

Thanks for tips, I'll do that also. For now I can only boot into Sequoia using USB. I tried to do what is said here: Moving OpenCore from USB to macOS Drive Grabbing OpenCore off the USB But when I run MountEFI I can't mound EFI partition from my MacintoshHD, it says no EFI partition. Also I put...

I’m stupid, I have 2 gpus. My monitor is connected to nvidia card. I forgot to swap cable to Amd gpu. Now I see installation going further. I’ll post results when I’m finished. 🤬😂😂😂

Hi, I'm stuck with installation of Sequioa on my desktop pc. Starts ok, then I get a lot of vm_shared_region_start_address() failed messages, then it stops and never continues. In attach is my EFI folder and pic of position where it stops. Any help is appriciated. P.S. specs from my signature...

Hi, I have RX 550 Lexa card and gfx spoof for Radeon Polaris. Also no hw acceleration in VideoProc. What is -radcodec boot arg, how did you get it to work?

When removing any kext from EFI folders, you remove them from config.plist also. After you install your system and get everything running you should make your own USBMap if you have more than 15 USB ports on any of usb controllers. I have one with 22 ports (2.0+3.0). Remove gpu injection cause...

I think my USBMap.kext should be removed. I have gpu block for GTX 1080TI - that should be removed. Also gpu injection for my RX550. Don't know what ethernet card is on your mobo, maybe your's will work. Rest should work ok.

Fenvi T919 working out of the box

Here is my EFI with latest OpenCore 0.7.6. Only thing to check is: 1. USBMap is according to my motherboard 2. In device properties one gpu is disable and second is spoofed So those 2 things I suppose should be changed

Update done

Here, but you have to move two device properties from config plist, cause I have one gpu which I have to disable and second one is spoof. If you have only one which is R7 240 you should find if it's supported or you have to do gpu spoof like I did. Also I disabled SmallTreeIntel82576.kext cause...