Search results

Is there any advantage to this over the traditional device-id property? I use it on my 6650 XT and it works fine. Looks like it injects a bunch of properties, any explications to those?

It's in the OP.

Looks like there are 2 different versions of AirportItlwm being loaded.

Is Above 4G Decoding enabled? What about Resizeable BAR Support? EDIT: Your MMIO whitelist is wrong, you have the first 4 false and the last one true, it should be the opposite, first 4 true and the last one false.

PciRoot(0x0)/Pci(1xC,0x03)/Pci(0x0,0x0) | Dictionary in DeviceProperties Under this add device-id | Data | 15F30000 You can screenshot and send here to double check. VT-d isn't needed when using AppleIntelI210Ethernet.

Details > Location Paths.

You probably need to spoof the controller. Find device path in Windows Device Manager.

Could someone try Continuity Camera with the new commit of FeatureUnlock: https://github.com/acidanthera/FeatureUnlock/commit/0e8d87f1ab3890e4805f4852428e43cf639a6c0? The AMD patches spoof the CPU to Intel 1st generation, Penryn, so this might fix the black screen. Check the dmesg for the line...

Can you send your DSDT?

ITE is an embedded device which controls onboard components, it's not the keyboard.

Keyboard being USB connected is impossible, it's PS/2. I'm not sure why it doesn't work for you, perhaps try disabling UTB? -utboff boot arg. Or try unplugging all USB devices when it gets stuck.

Hello, my GitHub repo has received a number of updates including a new workaround to the USB issue, with SSDT-XHC0-DISABLE, we are disabling the XHC0 controller which houses: the internal camera, the USB port on the left and the USB-C port. Disabling this controller results in a perfect boot...

It's based off RDNA 2.

WRed only supports Vega iGPUs, at least for now, and you can get a build from GH Actions.

Did you try pressing space? Is ScanPolicy set to 0? Do you have an HFS EFI Driver?

They're mapped like normal ports in Dortania's guide though... https://dortania.github.io/OpenCore-Post-Install/usb/manual/manual.html#usb-c-mapping

The ITE device is set to 0xFF (Internal, 255). Are you sure? I thought even front panel USBs had to be their respective type.

I used the newest version, 3.something, which I attached below, I prefer it since it has a dark mode. My map is fine, I custom made it and double checked it a few times, a lot of the headers are NOT populated. It was broken in the attached EFI, but a new one is attached. DummyPowerManagement...

I will try it tomorrow, but my NVMe controller is under GPP0...

Hello, so I got a new B550 Gaming X V2 board recently to replace my B450M DS3H (which sleep worked perfectly on!) but I am unable to get sleep to properly work. Every time I sleep it, my peripherals are staying on along with the fan until around 1 minute later, when they stop but then they start...