Recent content by unclesam

Today’s test update: When installing the P510 in the M2_2 slot, the macOS15 system still couldn’t boot or run properly. After that, I tested a T-Force TM8FFJ001T (NVMe Gen5 SSD) in the M2_1 slot — it worked fine, with benchmark results showing read speed around 10,000 MB/s and write speed around...

I'd like to share an update from today’s testing: Currently, with the P510 installed in the M2_3 slot, the system works very well. I also ran a speed test — the read speed is about 7100 MB/s, and the write speed is around 6600 MB/s. However, when I install the P510 in the M2_1 slot, macOS15...

Update: To double-check, I reinstalled the Crucial P510 back into my TUF B850M motherboard today — and surprisingly, the macOS installation worked perfectly fine this time. It seems that whatever issue caused the previous installation freeze has somehow been resolved, although I’m not entirely...

@fabiosun I wanted to share a quick update. My original plan was to make sure macOS 15 could be installed and run stably before doing the USB mapping process. However, I ended up completing the USB mapping during a break in the installation process anyway. After some testing, I found that the...

cpu: amd 9800x3d mb: asus tuf-b850m-plus wifi7 w ram: t-force ddr5 16gb*4 gpu: msi rx6600 xt 8gb nvme ssd: micron crucial p510 1tb sata ssd: intel 480g

I'm currently stuck at the macOS13 or 15 installer — the installation starts normally, but it always freezes midway through the process. I've tried several times and it always stops at the same stage. This is the first time I’ve encountered this issue — I’ve installed macOS many times before...

Hi @fabiosun Thanks for taking the time to reply! I really appreciate your work and all the guidance you’ve shared. Its WORK now. 😊

Hello everyone, I need some help with installing macOS 15.7.1 on my AMD Ryzen 7 9800X3D system. Here are my basic hardware details: CPU: Ryzen 7 9800X3D Motherboard: ASUS TUF B850M-Plus WiFi7 GPU: Radeon RX 6600 XT RAM: 64GB DDR5 NVMe SSD: Micron Cruical P510 1TB Here’s what I’ve tried so...

I think this should work now. Thank you all for your patience and help! And thanks to this forum, I’ve learned so much more!

@Edhawk Thanks , its helped me a lot

@Edhawk Thank you for the reminder — I wouldn’t have noticed this issue (USB3 type) otherwise. I’ll make some adjustments and test it again.

Since I previously overlooked the need to update the kernel patches, I’ve updated them today. However, even after the update, I still can’t boot into the macOS 26 installer. Attached below is my latest EFI.

Yes, I've practiced using CorpNewt’s USBMap on several different Hackintosh setups, so I believe my current USBMap should be compatible with macOS Tahoe. Yes, I have checked that Thunderbolt is Disabled.

Yes, I have disabled that WhateverGreen is false

Hi, When I boot using OpenCore and choose the “Install macOS Tahoe” option, it does not reach the installer screen. It stays in verbose text mode for a while, then automatically reboots or come with memory panic