Welcome to AMD OS X

Why not register now to gain full access.

Tutorials for the installation and post install.
#42148
@AlGrey ,Thanks so much for all the help,I finally made it work.To me ,I must delete the DSDT in patched folder, and only use D018 to HDEF and AZAL to HDEF patch. If I use D01A and D018 patch both,I would never get into the system.After tried so many times ,I finally made it work.And this reply is to thanks all the help I get from this forum, and maybe useful for the others.Thanks again for your great work!
AlGrey liked this

 Advertising

User avatar
by: Samekas
#42598
Didn't work for me, I only have now audio from the GPU DP which I didn't had before but no audio from green jacks.
You do not have the required permissions to view the files attached to this post.
User avatar
by: RaJaKaR
#42660
I tried the automated process but it says no audio codec found
You do not have the required permissions to view the files attached to this post.
User avatar
by: AlGrey
#42665
RaJaKaR wrote:
Fri Sep 14, 2018 10:11 pm
I tried the automated process but it says no audio codec found
run the script one more time or use the config attached
You do not have the required permissions to view the files attached to this post.
User avatar
by: RaJaKaR
#42673
AlGrey wrote:
Sat Sep 15, 2018 12:02 am
run the script one more time or use the config attached
Thank you very much for the reply,
I tried to run the sh again and this time I got the following result,
Code: Select all
Agreement
The audio_cloverALC script is for personal use only. Do not distribute
the patch, any or all of the files or the resulting patched AppleHDA.kext
for any reason without permission. The audio_cloverALC script is
provided as is and without any kind of warranty.
 
File: audio_cloverALC-130.command_v0.5
Release Mode
EFI partition is mounted
System Integrity Protection status: disabled.

OK to patch
Your audio device (VendorID,ProductID): 1022,1457 
/dev/fd/63: line 2142: syntax error: unexpected end of file
I tried with the config file you attached but got the exact same result
Last edited by RaJaKaR on Sat Sep 15, 2018 6:26 pm, edited 1 time in total.
User avatar
by: AlGrey
#42679
RaJaKaR wrote:
Sat Sep 15, 2018 3:58 am
AlGrey wrote:
Sat Sep 15, 2018 12:02 am
run the script one more time or use the config attached
Thank you very much for the reply,
I tried to run the sh again and this time I got the following result,

Code: Select all
Agreement
The audio_cloverALC script is for personal use only. Do not distribute
the patch, any or all of the files or the resulting patched AppleHDA.kext
for any reason without permission. The audio_cloverALC script is
provided as is and without any kind of warranty.
 
File: audio_cloverALC-130.command_v0.5
Release Mode
EFI partition is mounted
System Integrity Protection status: disabled.

OK to patch
Your audio device (VendorID,ProductID): 1022,1457 
/dev/fd/63: line 2142: syntax error: unexpected end of file
I tried with the config file you attached but got the exact same result
try one more time
User avatar
by: RaJaKaR
#42684
AlGrey wrote:
Sat Sep 15, 2018 3:56 pm
RaJaKaR wrote:
Sat Sep 15, 2018 3:58 am
AlGrey wrote:
Sat Sep 15, 2018 12:02 am
run the script one more time or use the config attached
Thank you very much for the reply,
I tried to run the sh again and this time I got the following result,

Code: Select all
Agreement
The audio_cloverALC script is for personal use only. Do not distribute
the patch, any or all of the files or the resulting patched AppleHDA.kext
for any reason without permission. The audio_cloverALC script is
provided as is and without any kind of warranty.
 
File: audio_cloverALC-130.command_v0.5
Release Mode
EFI partition is mounted
System Integrity Protection status: disabled.

OK to patch
Your audio device (VendorID,ProductID): 1022,1457 
/dev/fd/63: line 2142: syntax error: unexpected end of file
I tried with the config file you attached but got the exact same result
try one more time
Thanks again. This time it worked. I am getting audio output using "Internal Speakers" though I am using a headset connected to the rear 3.5mm port of the motherboard. is it normal? also I cannot get my microphone to work. How to fix it?

NB: I used "300" in Motherboard (300/200/x299/x99/Other = n)
User avatar
by: AlGrey
#42685
RaJaKaR wrote:
Sat Sep 15, 2018 6:34 pm
Thanks again. This time it worked. I am getting audio output using "Internal Speakers" though I am using a headset connected to the rear 3.5mm port of the motherboard. is it normal? also I cannot get my microphone to work. How to fix it?

NB: I used "300" in Motherboard (300/200/x299/x99/Other = n)
ummmmm why using 300 ? instructions are clear
Code: Select all
For the codec choice : Answer "y" to all questions except for Motherboard (300/200/x299/x99/Other = n). 
3.5mm jack on mobo is called Internal Speakers yes.
Is it a usb microphone ?
User avatar
by: RaJaKaR
#42687
AlGrey wrote:
Sat Sep 15, 2018 7:14 pm
RaJaKaR wrote:
Sat Sep 15, 2018 6:34 pm
Thanks again. This time it worked. I am getting audio output using "Internal Speakers" though I am using a headset connected to the rear 3.5mm port of the motherboard. is it normal? also I cannot get my microphone to work. How to fix it?

NB: I used "300" in Motherboard (300/200/x299/x99/Other = n)
ummmmm why using 300 ? instructions are clear
Code: Select all
For the codec choice : Answer "y" to all questions except for Motherboard (300/200/x299/x99/Other = n). 
3.5mm jack on mobo is called Internal Speakers yes.
Is it a usb microphone ?
No. its the mic attached to my headset with separate 3.5mm pink jack
  • 1
  • 2
  • 3
  • 4
  • 5
  • 9

Hi guys Just wondering what the ETA is on being a[…]

I'm using an Asus B450M Tuf gaming plus with a 270[…]

random ketbord freeze

Since when I updated to 10.13.16 I have continuos […]

How to Install ENOCH video)

Struggled forever getting this to work doing it al[…]

AMD OS X Advertisements