Grab the macOS Mojave 10.14.1 installer from this link: https://drive.google.com/drive/folders/ ... C4kliJRSdK
This requires the createinstallmedia
method, which is:
Type this command and hit ENTER
: sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/YOUR_USB_NAME
Type your password, hit ENTER
and hit ENTER
Now, it will erase your USB drive and make it a bootable installer.
This video, although originally made for High Sierra, demonstrates these steps in its entirety as it still applies for Mojave: https://www.youtube.com/watch?v=ydHyAmxPb_Y
Do an extra step and download the REQUIRED FILES
link in the description
Follow the video step-by-step until you copy the files to the USB.
Change these files in the folders on the USB you created with these files (link in signature
Go to PreInstall
-> (just overwrite the prelinkedkernel file, nothing else
Go to PostInstall
-> overwrite kernel
Go to PostInstall
-> overwrite System.kext
Once that's done, install the latest version of Clover on your USB (I believe it's 4844) and you can use the same kexts/drivers you used for your High Sierra installation.
Now will be a good time to copy the Clover EFI installer plus and other files that you may find necessary onto your USB in a separate folder.
Now restart and boot to the USB.
You may have to use these command to help you get to the installation screen: -v npci=0x3000 keepsyms=1 debug=0x100
(the last two and -v are important, add anything else if needed)
Once it reaches the Installation screen, format the drive of your choice, if needed, and install as normal.
Once done, reboot your system and boot back into your previous hackintosh (as this installation requires the help of another drive with a working Hackintosh system)
You'll now see your new target drive in Finder.
Open it, and navigate to /macOS Install Data/Locked Files/ Boot Files
with the plist file in the folder attached to this post
Also, overwrite prelinkedkernel
with the file in the folder (link in signature
Once the system reboots, boot back into the USB installer and open Terminal.
Run this command: /Volumes/Images\ /Volume/PreInstall/pre
Type the name of your target drive, hit ENTER.
Boot up via USB and choose Boot Install macOS from YOUR_DRIVE_NAME
Let the installer run until complete, then it'll reboot.
Now boot up again via USB to the installation menu (which is Boot Install macOS from YOUR_USB_NAME), open Terminal, then type this command: Volumes/Images\ /Volume/PostInstall/post
Type the name of the target drive, hit ENTER, let it work its magic, and once it presents you with a Kernel ID
, it has finished and you can reboot the system.
Boot via USB and now select Boot macOS from YOUR_DRIVE_NAME
and it should bring you to the language selection screen with the usual setup thereafter (create profile, etc.)
Once you've reached the desktop, install Clover in the same fashion as High Sierra, according to your system.
Everything was plain as day from this point forward.
If anyone can supply me with screenshots of them following each step, I'll gladly add to this and make an UNOFFICIAL GUIDE
for everyone else to follow, as I suck at screenshots/making screencaptured tutorials.