Welcome to AMD OS X

Why not register now to gain full access.

 Advertising

#42397
My computer restarted at the installation interface after running `preinstall`, which is the one WITHOUT cancel button. It just black-screened and rebooted, without any information.
Could anybody tell me what I can try?
Is it relevant that there is a Windows 10 installed on my SSD already, or I plug in too much hard drive on my computer? Except the Samsung PM981 mentioned at the signature, I still have one mechanical hard drive and one SATA SSD.
#42405
Hi!, Someone could guide me! I can not get off the screen, no matter the official or unofficial V3 version, it gets stuck there! If anyone could guide me, I would be grateful. I have tried all possible flags, and the system does not go up.

andrerds wrote:
Mon Aug 20, 2018 1:09 am
Hey, friends! how did i solve the problem printf work ?? , I am using the same version of the friend there above, already tried the amdhs-v3 version, which is giving me the same error!
already tried the version: HighSierraAMD V3 UNOFFICIAL
and the version: HighSierraAMD_V3
both gave the same error. *does printf work??*
My setup:
Mb: ASUS M5 A97 r2.0
Processor: FX6300
Graphics: Nvidia GT 710
SSD 120GB
16GB Ram.
#42494
I have the same problem as several here in the forum, the installation is done without problems, but when I get to the point where I have to "Booting to desktop" begin to appear letters on the black background, as if loading the OS, but the screen it turns black without any letter or logo or anything and I can not move forward, it happens the same if I do the InjectATI and FakeID, since my video card an AMD Radeon WX 7100, I read that this card has native support from the version 10.13.4, but apparently even that is not ready for use on a computer with AMD cpu

Anyone know how to solve this? I have read that entering safe mode lets you finish the installation, but unless I am the one who does not know how to enter in safe mode but neither that method has worked for me :cry:
#42559
Hi All
Like so many others I also have the problem with ATI GPU, great install.. but after/at the PostInstall i also got a Black Screen.
Was looking here and can see that alot have the problem with ATI GPU, I then looked on google and many URL later, i found a solution here https://www.tonymacx86.com/threads/high ... st-1689882 and it's fix the issue...

My Solution - that worked for me:
I added the USB stick to Another MAC, and got the EFI showed with Clover.
In the added the kexts there was only 2, so I also added the mandatory kext from "10.13 All CPU SSE4.1 kernel bronya".
- FakeSMC, NullCPUPowerManagement, Lilu, WhateverGreen and the Dummy USB.
(You can get the kexts from here: https://hackintosher.com/downloads/kexts/)

Then I edit my config.plist under "boot" with the add: nv_disable=1, and deleted (-radoff) and added (-radpg=15)

Then i saved the .plist file and started my other PC/MACOS with the USB again.
Booted from my MAC OS Volume from the Clover menu, the text loaded and a short black_screen was showed, the screen was changing from black to gray after 3 sec. and was starting MAC OS, hell yeah..... my ATI Radeon Pro 580 - 4 GB is working... YES

Hope it can help other with the black screen issue with ATI GPU
Last edited by thomaspetersen on Fri Sep 07, 2018 1:56 pm, edited 1 time in total.
#42561
thomaspetersen wrote:
Wed Sep 05, 2018 5:03 pm
Hi All
Like so many others I also have the problem with ATI GPU, great install.. but after/at the PostInstall i also got a Black Screen.
Was looking here and can see that alot have the problem with ATI GPU, I then looked on google and many URL later, i found a solution here https://www.tonymacx86.com/threads/high ... st-1689882 and it's fix the issue...

My Solution - that worked for me:
I added the USB stick to Another MAC, and got the EFI showed with Clover.
In the added the kexts there was only 2, so I also added the mandatory kext from "10.13 All CPU SSE4.1 kernel bronya".
- FakeSMC, NullCPUPowerManagement, Lilu, WhateverGreen and the Dummy USB.

Then I edit my config.plist under "boot" with the add: nv_disable=1, and deleted (-radoff) and added (-radpg=15)

Then i saved the .plist file and started my other PC/MACOS with the USB again.
Booted from my MAC OS Volume from the Clover menu, the text loaded and a short black_screen was showed, the screen was changing from black to gray after 3 sec. and was starting MAC OS, hell yeah..... my ATI Radeon Pro 580 - 4 GB is working... YES

Hope it can help other with the black screen issue with ATI GPU
thank you very much! early tomorrow I try what you say
Post Merged
What's more, where can I download "10.13 All CPU SSE4.1 kernel bronya"??
Post Merged
thomaspetersen wrote:Hi All
Like so many others I also have the problem with ATI GPU, great install.. but after/at the PostInstall i also got a Black Screen.
Was looking here and can see that alot have the problem with ATI GPU, I then looked on google and many URL later, i found a solution here https://www.tonymacx86.com/threads/high ... st-1689882 and it's fix the issue...

My Solution - that worked for me:
I added the USB stick to Another MAC, and got the EFI showed with Clover.
In the added the kexts there was only 2, so I also added the mandatory kext from "10.13 All CPU SSE4.1 kernel bronya".
- FakeSMC, NullCPUPowerManagement, Lilu, WhateverGreen and the Dummy USB.

Then I edit my config.plist under "boot" with the add: nv_disable=1, and deleted (-radoff) and added (-radpg=15)

Then i saved the .plist file and started my other PC/MACOS with the USB again.
Booted from my MAC OS Volume from the Clover menu, the text loaded and a short black_screen was showed, the screen was changing from black to gray after 3 sec. and was starting MAC OS, hell yeah..... my ATI Radeon Pro 580 - 4 GB is working... YES

Hope it can help other with the black screen issue with ATI GPU
that is going brother, I have not managed to work your method :(
#42573
gersonaaronruiz wrote:
thomaspetersen wrote:
Wed Sep 05, 2018 5:03 pm
Hi All
Like so many others I also have the problem with ATI GPU, great install.. but after/at the PostInstall i also got a Black Screen.
Was looking here and can see that alot have the problem with ATI GPU, I then looked on google and many URL later, i found a solution here https://www.tonymacx86.com/threads/high ... st-1689882 and it's fix the issue...

My Solution - that worked for me:
I added the USB stick to Another MAC, and got the EFI showed with Clover.
In the added the kexts there was only 2, so I also added the mandatory kext from "10.13 All CPU SSE4.1 kernel bronya".
- FakeSMC, NullCPUPowerManagement, Lilu, WhateverGreen and the Dummy USB.

Then I edit my config.plist under "boot" with the add: nv_disable=1, and deleted (-radoff) and added (-radpg=15)

Then i saved the .plist file and started my other PC/MACOS with the USB again.
Booted from my MAC OS Volume from the Clover menu, the text loaded and a short black_screen was showed, the screen was changing from black to gray after 3 sec. and was starting MAC OS, hell yeah..... my ATI Radeon Pro 580 - 4 GB is working... YES

Hope it can help other with the black screen issue with ATI GPU
thank you very much! early tomorrow I try what you say
Post Merged
What's more, where can I download "10.13 All CPU SSE4.1 kernel bronya"??
Post Merged
thomaspetersen wrote:Hi All
Like so many others I also have the problem with ATI GPU, great install.. but after/at the PostInstall i also got a Black Screen.
Was looking here and can see that alot have the problem with ATI GPU, I then looked on google and many URL later, i found a solution here https://www.tonymacx86.com/threads/high ... st-1689882 and it's fix the issue...

My Solution - that worked for me:
I added the USB stick to Another MAC, and got the EFI showed with Clover.
In the added the kexts there was only 2, so I also added the mandatory kext from "10.13 All CPU SSE4.1 kernel bronya".
- FakeSMC, NullCPUPowerManagement, Lilu, WhateverGreen and the Dummy USB.

Then I edit my config.plist under "boot" with the add: nv_disable=1, and deleted (-radoff) and added (-radpg=15)

Then i saved the .plist file and started my other PC/MACOS with the USB again.
Booted from my MAC OS Volume from the Clover menu, the text loaded and a short black_screen was showed, the screen was changing from black to gray after 3 sec. and was starting MAC OS, hell yeah..... my ATI Radeon Pro 580 - 4 GB is working... YES

Hope it can help other with the black screen issue with ATI GPU
that is going brother, I have not managed to work your method :(
Get the Kexts from here: https://hackintosher.com/downloads/kexts/
#42611
thomaspetersen wrote:
Fri Sep 07, 2018 1:55 pm
Get the Kexts from here: https://hackintosher.com/downloads/kexts/
:thumbup:
#42624
Some people with 970 chipset may hard inslall process same me =)
On 970 chip when install start - USB 2.0 porst are torn off... 10.13.x work onli with 3.0 ports. I have 2x3.0 ports on MB But i need to install Keyboard + mouse + usb drive with instaler =))
I install OSHS switching mouse & keybord some times in process - i do not know how make chenges in clover config & put kext to SLA on installer =) May be you add it to Disk Image?

SOLUTION:
1. install kext () from https://bitbucket.org/RehabMan/os-x-usb ... =downloads to SLA
using kext wizard or terminal
Code: Select all
sudo cp -R Release/USBInjectAll.kext /System/Library/Extensions
sudo touch /System/Library/Extensions && sudo kextcache -u /
2. add to your config plist :
2.1 to
Code: Select all
<key>Patches</key>
Code: Select all
				<dict>
					<key>Comment</key>
					<string>change _OSI to XOSI</string>
					<key>Find</key>
					<data>X09TSQ==</data>
					<key>Replace</key>
					<data>WE9TSQ==</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>change EHC1 to EH01</string>
					<key>Find</key>
					<data>RUhDMQ==</data>
					<key>Replace</key>
					<data>RUgwMQ==</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>change EHC2 to EH02</string>
					<key>Find</key>
					<data>RUhDMg==</data>
					<key>Replace</key>
					<data>RUgwMg==</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>change XHCI to XHC</string>
					<key>Find</key>
					<data>WEhDSQ==</data>
					<key>Replace</key>
					<data>WEhDXw==</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>change XHC1 to XHC</string>
					<key>Find</key>
					<data>WEhDMQ==</data>
					<key>Replace</key>
					<data>WEhDXw==</data>
				</dict>
2.2 to
Code: Select all
<key>KextsToPatch</key>
Code: Select all
<dict>
				<key>Comment</key>
				<string>change 15 port limit to 26 in XHCI kext</string>
				<key>MatchOS</key>
				<string>10.11.x</string>
				<key>Name</key>
				<string>com.apple.driver.usb.AppleUSBXHCIPCI</string>
				<key>Find</key>
				<data>g72M/v//EA==</data>
				<key>Replace</key>
				<data>g72M/v//Gw==</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>change 15 port limit to 26 in XHCI kext</string>
				<key>MatchOS</key>
				<string>10.12.x</string>
				<key>Name</key>
				<string>com.apple.driver.usb.AppleUSBXHCIPCI</string>
				<key>Find</key>
				<data>g710////EA==</data>
				<key>Replace</key>
				<data>g710////Gw==</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>change 15 port limit to 26 in XHCI kext</string>
				<key>MatchOS</key>
				<string>10.13.0,10.13.1,10.13.2,10.13.3</string>
				<key>Name</key>
				<string>com.apple.driver.usb.AppleUSBXHCIPCI</string>
				<key>Find</key>
				<data>g32MEA==</data>
				<key>Replace</key>
				<data>g32MGw==</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>disable port limit in XHCI kext (credit PMHeart)</string>
				<key>MatchOS</key>
				<string>10.13.4,10.13.5</string>
				<key>Name</key>
				<string>com.apple.driver.usb.AppleUSBXHCI</string>
				<key>Find</key>
				<data>g32UDw+DlwQAAA==</data>
				<key>Replace</key>
				<data>g32UD5CQkJCQkA==</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>change 15 port limit to 26 in XHCI kext (credit FredWst)</string>
				<key>MatchOS</key>
				<string>10.13.4,10.13.5</string>
				<key>Name</key>
				<string>com.apple.driver.usb.AppleUSBXHCI</string>
				<key>Find</key>
				<data>g32UDw+DlwQ=</data>
				<key>Replace</key>
				<data>g32UGg+DlwQ=</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>disable port limit in XHCI kext (credit RehabMan, based prior PMHeart patch)</string>
				<key>MatchOS</key>
				<string>10.13.6</string>
				<key>Name</key>
				<string>com.apple.driver.usb.AppleUSBXHCI</string>
				<key>Find</key>
				<data>g32IDw+DpwQAAA==</data>
				<key>Replace</key>
				<data>g32ID5CQkJCQkA==</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>disable port limit in XHCI kext (credit PMHeart)</string>
				<key>MatchOS</key>
				<string>10.14.x</string>
				<key>Name</key>
				<string>com.apple.driver.usb.AppleUSBXHCI</string>
				<key>Find</key>
				<data>g/sPD4MDBQAA</data>
				<key>Replace</key>
				<data>g/sPkJCQkJCQ</data>
			</dict>
3. reboot and bee happy =))

PS may be some body nooobe in hackintosh same me =)) Thnx a lot =)
  • 1
  • 8
  • 9
  • 10
  • 11
  • 12
  • 19
Bluetooth at Login?

Hello everyone, Long time lurker first time poste[…]

Hi Is it able to sleep and wake properly? Thanks

Yes i have, and the error disappeared. did yo[…]

[email protected]: AppleUSBEHCI::RestartUSBBus: USBS[…]