- Wed Nov 13, 2019 7:11 pm
#52387

Interesting how this build came about (post is still pending completion)! AMD discord has been essential in getting this build working. I decided to embark on a mini-itx build since I am tired of machines taking up unneeded space. I decided to downsize as much as possible. I settled on a B450 board since I didn't need more than a few key pieces of hardware. Here is the build:
Hardware
Working:
Not working:
Pending hardware:
I was a bit frustrated with the USB situation on my previous AMD board. Therefore, I decided to make a custom SSDT for this board. I was able to pull the info of my ports' exact addresses / capabilities with USBDevTree in Windows. I printed out the text report and got to work. I have attached the SSDT to the post. Every port works with the proper speed. I am currently using numerous external drives with my main driver being a 512GB Samsumg Pro 960 in an USB 10gbps capable NVM enclosure.
Let me know if you guys would be interested in anything in my system or any requests.

Interesting how this build came about (post is still pending completion)! AMD discord has been essential in getting this build working. I decided to embark on a mini-itx build since I am tired of machines taking up unneeded space. I decided to downsize as much as possible. I settled on a B450 board since I didn't need more than a few key pieces of hardware. Here is the build:
Hardware
- CPU: AMD Ryzen 7 1700 running @ 3.6 GHz
- Motherboard: ASRock B450 Gaming-ITX/AC
- RAM: G.SKILL TridentZ Series 16GB (2x8GB) - F4-3600C16D-16GTZ
- HDD: Mushkin Pilot-E NVMe M.2 SSD 1TB
- USB : 3.X with USB-C (10gbps)
- GPU: SAPPHIRE Radeon RX Vega 64
- LAN: Intel 210T (smalltree Kext)
- LAN: Broadcom BCM94360CS2 (Natively supported)
- BT: BRCM20702
- Sound: USB DAC
Working:
- GPU
- Intel NIC
- WiFi
- Bluetooth
- All USB ports
- OpenCore boot
- Windows 10 install
- Sleep
Not working:
- DRM
Pending hardware:
- DAN case
I was a bit frustrated with the USB situation on my previous AMD board. Therefore, I decided to make a custom SSDT for this board. I was able to pull the info of my ports' exact addresses / capabilities with USBDevTree in Windows. I printed out the text report and got to work. I have attached the SSDT to the post. Every port works with the proper speed. I am currently using numerous external drives with my main driver being a 512GB Samsumg Pro 960 in an USB 10gbps capable NVM enclosure.
Let me know if you guys would be interested in anything in my system or any requests.
Spoiler:
karistuck liked this
AMD Ryzen 7 1700
ASRock AB350M-HDV
16GB Corsair DDR4
4GB GTX 970
512 GB Samsung 960Pro NVMe
ASRock AB350M-HDV
16GB Corsair DDR4
4GB GTX 970
512 GB Samsung 960Pro NVMe



