Welcome to AMD OS X

Why not register now to gain full access.

Tutorials for the installation and post install.
User avatar
by: AlGrey
#45449
AppleALC is now compatible with the Zen platform.

You can get a copy from here : https://github.com/acidanthera/AppleALC/releases
Also get the latest Lilu : https://github.com/acidanthera/Lilu/releases

Instructions :

1. Mount the EFI partition : Open Clover Configurator and click on the "Mount EFI" tab. Under Efi Partitions, identify your hard drive and click MOUNT PARTITION.

2. IF PRESENT, Remove AppleHDADisabler.kext and VoodooHDA.kext from EFI/CLOVER/kexts/10.xx and Other (xx is your MacOs version)

3. Copy Lilu.kext and AppleALC.kext to EFI/CLOVER/kexts/Other

4. Open your config.plist (in /EFI/CLOVER/)

5. Add the following bootflag. Replace XX with a compatible codec layout (https://github.com/acidanthera/AppleALC ... ted-codecs)
Code: Select all
alcid=XX

Help and Problem Reporting
Attach the following files in a zip file:
- config.plist
- IORegistryExplorer dump (File -> save)
- and make sure you have your specs in your signature + MacOS version you are using.
Code: Select all
IORegistryExplorer : https://nofile.io/f/cyhoWKcGM8f/debugtools.zip
Shaneee, Marcyvee liked this

 Advertising

User avatar
by: Jimmy1232
#45452
I still experience audio crackling with AppleALC. On top of that, volume is extremely quiet (basically unusable) AND audio output for speakers and headphones is combined (so I can't pick which one to use without physically plugging/unplugging headphones), so VoodooHDA is objectively better on my Ryzen build

OS: MacOS Mojave 10.14.1
CPU: Ryzen 2200G
MOBO: MSI B350M Mortar
GPU: Sapphire RX580 Nitro+
RAM: 16GB DDR4 @ 3200Mhz
Ethernet: Yes
SSD: Yes
USB: Not working properly
Sound: Not working properly
You do not have the required permissions to view the files attached to this post.
User avatar
by: Marcyvee
#45456
:clap: Do it works with mojave 10.14.3?
If yes, how to check my codec version? I have a gigabyte ab350 gaming rev1
User avatar
by: Shaneee
#45460
Marcyvee wrote::clap: Do it works with mojave 10.14.3?
If yes, how to check my codec version? I have a gigabyte ab350 gaming rev1
Should do yes but 10.14.3 isn't recommended as kernel is only on 10.14.1

You'll need layout 11. Same board as me.
Marcyvee liked this
User avatar
by: Marcyvee
#45472
I think is not what I were looking for. Today I'll try your new kernel.
User avatar
by: Taillis Mariquito
#45501
I tried all layouts available for me and none worked. I have a ALC887 and here is my specs
Processor: AMD Ryzen 5 2600X
Motherboard: Gigabyte GA-A320M-S2H
GPU: MSI RX580 Armor OC 8Gb
Memory: 8GB DDR4 2333Mhz
Mojave 10.14.3
You do not have the required permissions to view the files attached to this post.
User avatar
by: TaeSeok Kim
#45592
my audio doesn't work... here is my specs...
CPU : AMD Ryzen 2400G
MOBO : Asrock B450 Gaming its/ac
GPU : Gigabyte RX580 Gaming 4G
RAM : 8x2 DDR4 233
MOJAVE 10.14.3
You do not have the required permissions to view the files attached to this post.

Thank you very much for this guide. Everything is[…]

:thumbup: Post Merged :clap: Post Merged b[…]

On the off chance that

Trialix I utilized this machine of development, an[…]

Just wondering if the parts I've chosen will work […]