• How to Install El Capitan v2

  • Tutorials for the installation and post install.

Please remember to read and follow the rules here.

Please Donate if you've found the website useful. Thanks.

Tutorials for the installation and post install.
#22674 by vitorlage
Wed Jun 21, 2017 4:46 pm
Since not everyone is used to be an Hachintosher and a lot are just taking there first steps into Hachintosh World, I decided to write this small Tutorial to help mainly the starters.

System Requirements
CPU with SSE4.1 Support
HDD for Sierra
Windows or Windows Virtual Machine
Transmac
USB drive with 8GB
El Capitan image from here
Code: Select all
https://mega.nz/#!D4AwHY5Q!AJ0swqiHr-vm72t3CUz8vAMi_NiGHKbU-u3DD6gv8Vc
and here
Code: Select all
https://mega.nz/#!srBR3JbA!fAbBrSxzbd_grP7Szg6T3aVfXCTUL01JYvad9W_tow8 
Lot's of coffee

*Bios Settings
VT-d = Off
Windows 7 installation mode = Off
Serial port (Super I/O) = Off
EFI Boot = On
Sata AHCI = On
CSM = On
USB Legacy =On
Secure Boot = Off (if it exists)
Fast Boot = Off
Set ErP = Enabled
Set XHCI Handoff to Enabled

* This are general guide lines, not all BIOS have this options or are they equal


Follow this Shaneee tutorial
Now that you've finished Shaneee Transmac tutorial, download, extract the zip file attached to the bottom of this post.

Now drag and drop the extracted files to the USB Installer and check if the files are there, like in the picture below.

There is a Bootloaders folder I've created for placing the bootloaders inside. (Its optional, but advisable)

Image


Boot with USB Installer you've just created and in command prompt hit Enter.
El Capitan v2 already comes with 3 predefined bootflags (remember that).
-f -v npci=0x3000

Now that you booted and everything went well goto the Top bar and select Disk Utility from Utilities.
If you stop at "Still waiting for root device"hot swap the USB Installer to other port
In Disk Utility select the HDD where you're going to install Sierra and click Erase
Image
Now change Name: macOS, Format : Mac OS Extended (Journaled), Scheme: GUID Partition Map
Update: I used Name: macOS for exemplification purposes, but you can choose your own name for the HDD. (DON'T USE SPACED NAMES, e.g. Mac OS) If you change your HDD name, don't forget to replace it when your issuing commands
Image
If everything went fine you can now close Disk Utility and continue the installation



After installing El Capitan, you're going to boot again trough USB Installer to do the PostInstall.
Boot and open Terminal (in the upper right corner change the flag to match your keyboard if you wish)
Now issue the command:
Code: Select all
sh /Volumes/"OS X Base System"/PostInstall/post.sh
If after running the command you didn't get an error like 107 error, then you can keep on


This said, you can restart.
Boot again trough USB Installer cause you're HDD is not yet bootable, in the command prompt choose your HDD (macOS) and hit Enter.

If you managed to create your account and entered the Desktop without the -x flag (safe mode), google, download and run Kext Utility, cause it solves the suddenly restarts and crashes.


NEVER try to install a bootloader in Safe Mode ( -x )
The only thing missing is to install a bootloader for you to be able to boot through your HDD at last.
For that, goto the PostInstall folder inside your USB Installer and choose ENOCH or CLOVER.

Now follow
ENCOCH Tutorial viewtopic.php?f=24&t=1729
CLOVER Tutorial viewtopic.php?f=24&t=1613


For the owners of a Nvidia's cards you probably want to install NvidiaWeb drivers to get graphic acceleration.
Just follow this Tutorial: viewtopic.php?f=24&t=1895

For the owners of Radeon's cards you don't need to install nothing the drivers already come with Sierra. You want to take a look here to see if your card works Out Of the Box (OOB):
Code: Select all
https://www.tonymacx86.com/threads/radeon-compatibility-guide-ati-amd-graphics-cards.171291/

If this doesn't work for you, just post for support and someone will try to help you. This way I can fine tune this Tutorial.
You do not have the required permissions to view the files attached to this post.
Last edited by Norton287 on Sat Oct 21, 2017 1:36 pm, edited 1 time in total.

This topic has 30 replies
You must be a registered member and logged in to view the replies in this topic.

 Advertising