Rebuilt hackintosh now rebooting!

[treyvaud]

Hi all,
I rebuilt my hackintosh, and now it's rebooting even though I'm using the same control.plist etc. Any ideas on what's causing the panic please?

 

[leesurone]

Hi all,
I rebuilt my hackintosh, and now it's rebooting even though I'm using the same control.plist etc. Any ideas on what's causing the panic please?

What do you mean you rebuilt it, you changed hardware (which seems less likely) or you changed your EFI?

 

[Shaneee]

It's related to the GPU. Make sure you've got NootedRed updated for your iGPU and you've not got any Device Properties set as they'll interfere with it.

 

[treyvaud]

What do you mean you rebuilt it, you changed hardware (which seems less likely) or you changed your EFI?

HI there, I rebuilt the machine as I FUBAR'd it by rebuilding the EFI. Think I have most things going again now, but could use some guidance on the specific settings for the AMD iGPU Vega 8. I'm using the latest Nootedred. Should I delete all the device properties out of here?

 

[treyvaud]

It's related to the GPU. Make sure you've got NootedRed updated for your iGPU and you've not got any Device Properties set as they'll interfere with it.

So I should delete all of these?

 

[Edhawk]

Yes, delete the DeviceProperties from your config.plist.

 

[treyvaud]

So I should delete all of thes

So I should delete all of these?

Hi there, thank you for your assistance so far. I've removed the device properties and it seems to be working for the install, but it's REALLY slow. Currently using iMac20,1 SMBIOS.

I'm using a Trigkey S5 which I believe is the same as a Beelink SER5 - I've attached my updated config.plist here. Is there anything else in there which needs to be fixed in order to get it to work?
AMD Ryzen 7 5800H
AMD Vega 8 iGPU