Search results

@Dasboot5 There's another guide here, https://github.com/5T33Z0/OC-Little-Translated/blob/main/12_MMIO_Whitelist/README.md

Supported cards are listed here, https://dortania.github.io/GPU-Buyers-Guide/modern-gpus/amd-gpu.html#native-amd-gpus The 6700 and 6700 XT require NootRX.kext

Share an image of the full panic so we can see exactly what is causing it. All I can see from that is there's an IOService crashing during either "start", "probe" or "ServiceMatch".

Latest kexts? The RX570 shouldn't need any boot args so remove agdpmod= if you've got it.

There's your answer. They conflict with each other. As you've got the iGPU disabled you don't need NootedRed so remove the kext and remove the entry from your config leaving only Whatevergreen and it should work.

I'd suggest having Console open when running the ping test so you can check for anything in the system log when the connection drops. If there is anything noticable you'd be best opening a support ticket on the AppleIGC GitHub page to be honest.

Those panics are related to the GPU, WindowServer seems to be crashing.

Qualcom WiFi? That won't work in macOS. You'd either need to use LAN or swap it to a supported WiFi chip. As for where it's stuck. Can you provide a full picture of whats on the screen.

Cleaned up your EFI and updated it. I'm assuming you've made the USB map kexts on Windows so I've left those in place. Your setup for the PS2 kexts may need some tweaking but try it as is. Unsure what LAN NIC is on that laptop so I've left RTL8111 there. You had device properties full of every...

There's your issue, Description of that boot arg,

Extra steps here, https://github.com/mrlimerunner/sonoma-wifi-hacks Make sure to use IOSkywalkFamily-v1.2.0 for Sequoia

What's the working one? Because your Sonoma EFI has the CPUR SSDT for B550 and your Sequoia one doesn't. So I'd assume that's your main issue. Also your Sequoia SMBios, set that to the same as you had matching Serials etc to stop any iCloud sync errors. For your BCM card to work you'll need...

Edhawk is saying if you replace the Realtek WiFi chip with an Intel one it'll work. Not that you've got an Intel CPU.

Your config seems fine but try this. More information would also help. You say "unable to boot" but does it show any errors? Get stuck on something?

Here you go. Device properties removed due to NootedRed and alcid=2 added in place. Removed npci boot arg. Please use Above 4G in your BIOS. Check BIOS settings here, https://dortania.github.io/OpenCore-Install-Guide/AMD/zen.html#amd-bios-settings

You can use the VMHide kext, https://github.com/Carnations-Botanica/VMHide

All VMs unless you're using PCI Passthrough with a supported GPU.

I flashed my old RX 580 to support UEFI by updating the GOP on the VBIOS, https://winraid.level1techs.com/t/amd-and-nvidia-gop-update-no-requests-diy/30917

Have you used OCLP? That EFI is setup for Modern Wireless from OCLP. Disable the changes for that as that's what's causing the issue. Either injection of the new kext for OCLP isn't working or you've not updated it for Sequoia. Updated version of the kext can be found here to inject...

Only issue I could see was the SMBios. NootedRed doesn't recommend MacPro7,1. This is changed to iMacPro1,1