Search results

I can't :ROFLMAO:, the board only has 1 full pcie x16 5.0 port https://rog.asus.com/es/motherboards/rog-strix/rog-strix-x670e-f-gaming-wifi-model/

That is in terminal "sudo dmesg" correct??

If I already did, disable the Wi-Fi kext... but i225 is not working... PCIe should not work either

Kernel panic :eek: and I see in the vebose an RTC error (lilu)

well no luck... with WEG and agdpmod=pikera have a black screen does not load the desktop and without WEG or agdmod it stays here

black screen when it should load the desktop, the GPU does not stop the fans, when it enters the desktop well the gpu enters ZeroRPM .. have you activated WEG?? This computer doesn't like that very much... it usually gives black screens many times if it is used FENVI I see in the verbose mode...

Here goes the efi!!

Same problem on verbose??

I get an acpi error in verbose mode and it seems that the ssdt does nothing

WoW!! I'm excited waiting for that new SSDT 🙌 I have already removed the FENVI that I use in another hackitnosh, in this one I would not need it, and it is one less problem to adjust 😆

How is that?? 😅

NO, that SSDT I already tried it several times and it has no effect .. the network is not loaded I have been trying the PCIe and in none of them the FENVI works... and that card is native, in the other hackintosh you don't have to do anything, just put it in the PCIe and it works

I don't think any PCIe is working... only the GPU one... is there a problem with MacOS with the remaining PCIe ports x1 and x4 that connect to the x670e chipset I'm going to add the ssdt from another computer and look at it please, I don't know if it will be ok

I already flashed it a while ago, but it still doesn't work I've tried many configurations and nothing works... any more ideas?

Uufff!!! clear cmos has done the magic...it was making me nervous 😂 I am going to change firmware (y)

The problem is now reverting the changes ( disable SRV-IO ). leaving the EFI as it was before, it keeps doing the same thing, I get a black screen when it goes to the desktop :eek:

Of course, I did that when I activated WEG, I always do it (y)

I already did that once on another board, but that's for i225v version 1 and 2... this already has v3, and on my Alder Lake it works perfectly... and also on the 5900x that has i225v version 2... It seems strange to me that flashing an old firmware works... but for testing I can try What a...

Well, now we are going to have a problem.. :eek: Activating SRV-IO in bios gives me a black screen when I get to the desktop.... But it is that now even if I deactivate it and leave it as before, it continues to give a black screen😅

@ExtremeXT Without e1000=0 it doesn't get to the desktop, it doesn't hang or reboot, I just get a black screen every time, even if I enable or disable IOMMU And regarding FENVI, in verbose mode, this comes out: EDIT: It's not a problem with e1000=0, it's IOMMU, if I activate it I always...