[UPDATE] GIGABYTE X570 AORUS MASTER | 5600XT | OC 0.7.2 | Big Sur 11.5.1 | Monterey B4

Neckbeard

New member
AMD OS X Member
Joined
May 3, 2020
Messages
24
Update:
8/3/2021 Update: updated to most recent OC, kexts, and added restricted events to fix CPU reporting.

Config:
MacPro 7,1
OpenCore 0.7.2
CPU: Ryzen 9 5950X
Cooler: NZXT x63 280mm AIO
MB: Gigabyte X570 Aorus Master - BIOS F34
RAM: 32GB (2x16GB) Corsair Vengeance RGB PRO 3200MHz
Graphics: Sapphire Pulse Radeon RX 5600 XT
Storage: 256 GB Samsung Evo 960 NVME / 500GB WD Black SATA
Ethernet: Onboard Intel gigabit
Wifi/BT: Onboard BT disabled | Fenvi T919
Case: Lian Li O11 Dynamic XL
Controller: Corsair Commander PRO

Working:
Facetime, Handoff, Airdrop, AirPods PRO

Screen Shot 2021-08-04 at 9.04.27 PM.png

USB Config:
I have lighting controllers and other usb stuff that does not play nice so I disabled the USB2 headers and used a USB3 header to usb2 header for my Fenvi card. Works beautifully.

CineBench 3900x: 7372
CineBench 5950x: 9530

GeekBench 3900x:
Single Threaded: 1326
Multi-Threaded: 11234

GeekBench 5950x:
Single Threaded: 1616
Multi-Threaded: 14472
 

Attachments

  • NL9pwHQ.jpg
    NL9pwHQ.jpg
    829.8 KB · Views: 29
  • OC-0.7.2_8-3-2021.zip
    8.9 MB · Views: 61
  • Screen Shot 2021-08-04 at 8.17.26 PM.png
    Screen Shot 2021-08-04 at 8.17.26 PM.png
    129.5 KB · Views: 10
Last edited:

kundica

New member
AMD OS X Member
Joined
Jun 20, 2020
Messages
1
I'm about to swap to this board from my C7H. I'm currently running iMacPro1,1 and interested in switching to MacPro7,1. Is there anything I should know about the change to avoid triggering a lockout on my Apple services?

Also, did you do any USB remapping to get your ports to work correctly?
 

iamso78

New member
AMD OS X Member
Joined
May 12, 2020
Messages
21
Any issues with "Above 4G decoding enabled" causing Win10 not shutting down? I have this problem on BIOS F20a.
 

Neckbeard

New member
AMD OS X Member
Joined
May 3, 2020
Messages
24
I'm about to swap to this board from my C7H. I'm currently running iMacPro1,1 and interested in switching to MacPro7,1. Is there anything I should know about the change to avoid triggering a lockout on my Apple services?

Also, did you do any USB remapping to get your ports to work correctly?

I used a remapping someone else did and then did some modifications. I'll Clean up the EFI and update the OP tomorrow.
 

Neckbeard

New member
AMD OS X Member
Joined
May 3, 2020
Messages
24
Any issues with "Above 4G decoding enabled" causing Win10 not shutting down? I have this problem on BIOS F20a.

I had the same issues on F20a, along with my Windows install losing its bootloader somehow today on Win10 2004.
 

iamso78

New member
AMD OS X Member
Joined
May 12, 2020
Messages
21
I had the same issues on F20a, along with my Windows install losing its bootloader somehow today on Win10 2004.

rofl good to know, I just switch board from Taichi since rev. 1.1 now support Thunderbolt AIC. You experiencing coil whine on VRM when CPU under heavy stress?
eg. Blender render, cineR20?

Moreover, for some reason I can't set XMP profile with manual CPU Vcore, will fail all the time (I using 3950x paired with 2x16GB G.Skill 3600 16-19-19-36).
Can set manual CPU Vcore without XMP, or XMP without manual CPU Vcore, even a small increment of +/-0.01V will fail to boot. Tested on both F20a n F12g BIOS.
 

edo

New member
AMD OS X Member
Joined
Jun 10, 2020
Messages
5
hey @Neckbeard can you share your EFI with us? How's overall performance?
 

Neckbeard

New member
AMD OS X Member
Joined
May 3, 2020
Messages
24
@edo - I added benchmarks in the OP

@iamso78 - I don't hear any whine, but I have a lot of fans and the AIO pump that probably mask it. Also, if you use:
shutdown /s /t 0

to shutdown it will fully shutdown with above4g and F20a bios. Annoying, but WAY worth the benefits in Catalina.

@kundica - I attached my cleaned EFI to the OP
 

iamso78

New member
AMD OS X Member
Joined
May 12, 2020
Messages
21
@edo - I added benchmarks in the OP

@iamso78 - I don't hear any whine, but I have a lot of fans and the AIO pump that probably mask it. Also, if you use:
shutdown /s /t 0

to shutdown it will fully shutdown with above4g and F20a bios. Annoying, but WAY worth the benefits in Catalina.

@kundica - I attached my cleaned EFI to the OP

Thanx for the shutdown command, now just need to troubleshoot why I cannot static overclocked CPU with XMP enabled, hopefully is just a ram compatibility issue.
 

Neckbeard

New member
AMD OS X Member
Joined
May 3, 2020
Messages
24
Bump for updated processor, config, and EFI.
 

AudioGod

Guru
Guru
Joined
Nov 7, 2020
Messages
1,386
Hi Buddy, Pardon me for the message but I wanted to point out that your 5950x is scoring way way wrong via geekbench.
I have a 5900x and I’m almost matching your multi score and beating your single score when it should be the other way around.

Your GeekBench 5950x:
Single Threaded: 1616
Multi-Threaded: 14472

My GeekBench 5900x:
Single Threaded 1680
Multi Threaded 14133

I would say my single core score is slightly above average for a 5900x but not my multi core score, your score should be a lot higher on the multi (closer to 18000) and at least matching if not beating my single threaded score, (and you have a better board then me too(Pro vs Master))
I would say you have something a miss bios settings or setup wise good sir.

P.s Lovely build bud :)
 

storminCdn

New member
AMD OS X Member
Joined
Jul 24, 2020
Messages
8
How do you disable the onboard BT and Wifi? I have the same board and you can't do it via the BIOS.
 

Neckbeard

New member
AMD OS X Member
Joined
May 3, 2020
Messages
24
Bump for updated OC 0.7.2 and Monterey support
 

zhong

New member
AMD OS X Member
Joined
Nov 9, 2022
Messages
1
嗨,伙计,请原谅我的消息,但我想指出您的 5950x 通过 geekbench 得分错误。
我有一个 5900 倍,我几乎可以匹配你的多分,并在应该相反的时候击败你的单分。

您的极客长凳 5950x:
单螺纹:1616
多线程:14472

我的极客长凳 5900x:
单螺纹 1680
多线程 14133

我会说我的单核分数略高于 5900x 的平均水平,但不是我的多核分数,你的分数应该在多核上高得多(接近 18000),如果不击败我的单线程分数,至少匹配,(而且你有一个比我更好的板子(专业与大师))
我会说你有一些错过的 bios 设置或设置明智的好先生。

附言可爱的构建芽:)
我和你一样是 5900 倍,但极客长凳只有 9000 你能分享你的 EFI
 
Top Bottom
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.