Update failed due to "The bless tool was unable to set the current boot disk.:(-69793)"

jsl2020

Member
Joined
Jun 5, 2020
Messages
33
My FX-6300 hackintoshs can not update security update in Catalina 10.15.7(19H1708).
The error message and picture were posted here:
The same error presented as reboot loop during update of Big Sur or Monterey if legacy booted by Clover 5142/5143
 

Attachments

  • Screen Shot 2022-01-16 at 3.14.01 PM.png
    Screen Shot 2022-01-16 at 3.14.01 PM.png
    1.4 MB · Views: 4
  • config.plist
    40 KB · Views: 1

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
1,852
Do you have SIP enabled and working NVRAM?
 

jsl2020

Member
Joined
Jun 5, 2020
Messages
33
Do you have SIP enabled and working NVRAM?
SIP was disabled by 0xfef without native NVRAM in FX-6300 hackintosh.
What do you advise to fix this issue ?
I need enter F11 key to reset NVRAM before legacy boot by Clover.
 

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
1,852
Try this. Found on the German Hackintosh forum,

Then enter the following in the terminal:
diskutil mount /dev/disk0s1 and confirm with enter (change path to disk0s1 on your hard disks if different)
Then enter the following again
bless --mount /Volumes/EFI --setBoot and also confirm with enter.
 
Top Bottom